To Create or Edit a Bend Order Sequence
1. In an open board part, click Model > Bends > Bend Order. The Bend Order dialog box opens.
|
You can also access the Bend Order dialog box from the Model Properties dialog box.
|
2. To select a fixed geometry reference that is different from that of the part, click the Fixed geometry collector and choose a different reference.
3. To flip the fixed geometry to the other side of the edge, click Flip.
|
The Flip command is available only when an edge between two nontangent surfaces is selected as a reference.
|
4. Click Add Bend and select one or more bends to add to the sequence.
5. To create a new bend order sequence, click Add Sequence and add all required bends.
To define a fixed geometry reference different from the part fixed geometry reference, click the Sequence fixed geometry collector and choose a different reference.
6. To edit a bend order sequence, select a sequence from the list and then make any required changes.
7. Click OK.