To Change Bend Settings
1. In an open board part, click
File >
Prepare >
Model Properties. The
Model Properties dialog box opens.
2. Under Board, click change in the Bends line. The Preferences dialog box opens.
3. Click Bends.
4. To specify a different value for the bend radius, type a new value in the box, or select a value from the list.
5. Set the bend dimension location:
◦ Inside—Dimensions the radius from the inside surface of the bend.
◦ Outside—Dimensions the radius from the outside surface of the bend.
6. To specify a different bend angle, type a new value in the box or select a value from the list.
7. Click OK and regenerate the model.