To Edit a Segment
1. Do one of the following:
◦ Select a network or cable segment in the graphics window, right-click, and click
from the shortcut menu. The
Location tab opens.
◦ When you are creating locations after one or more locations have been placed, right-click in the graphics window and click
Edit Segment from the shortcut menu, or click
on the tab.
2. On the Items tab, select a location in the Locations list. A drag handle appears at the selection location.
3. Drag the handle to reposition the location.
| • When you move a location, any dependent locations move as well to maintain the offset distance. • You can not move a location to a position that violates the bend radius limitations of the cable. |
4. Right-click the selected location in the graphics window and click Redefine.
◦ To redefine a Free location, right-click the location again and choose one of the following options:
▪ Clear
▪ On
▪ Dependent
▪ Use Previous Location
◦ To redefine an On Axis location, right-click and select one of the following options:
▪ Flip Locations
|  Flip Locations option is available only when you place at least two locations on an axis. |
▪ Relocate
5. Click Placement to modify offset dimensions.
6. Click
.