To Set the Tolerance Display for Individual Dimensions
1. Select a dimension. The Dimension ribbon tab opens.
2. Select a tolerance format from the Tolerance list and specify values as follows:
◦ For the Limits format, specify values in the Upper Tolerance and Lower Tolerance boxes.
◦ For the Nominal and Plus-Minus formats, specify values in the Nominal Value, Upper Tolerance, and Lower Tolerance boxes.
◦ For the Symmetric format, specify values in the Nominal Value and Tolerance boxes.
|
If you select the Symmetric format and select the Superscript option, the dimension tolerance value is aligned to the dimension text in such a way that it begins at the half-way point of the dimension text extending up.
Dimensions that are below dimension leader lines automatically adjust such that the corresponding text does not overlap with their dimension leader lines.
|
When tolerances appear, the system displays the default tolerance values in the lower-right corner of the graphics screen.