To Display a Single Part Surface View
You can create single part surface views out of a solid surface or a datum quilt. The single part surface view displays a selected surface in wireframe, however any other geometry is erased, including datums, cosmetic features, and coordinate systems. You can create regular projection views as well as single-surface projection views from single-surface views.
1. Open a drawing.
2. Double-click an existing view. Alternatively, select a view, right-click and click Properties on the shortcut menu. The Drawing View dialog box opens.
3. Click the Sections category. The Section options display in the dialog box.
4. Click Single part surface. The surface collector activates and you are prompted to select the surface to display.
5. Select the single part surface to display in the view. The surface highlights on the drawing and is listed in the collector. Click Apply to see the single part surface view. If the view is not acceptable, repeat the steps above. If the view is appropriate and no changes needs to be made, select the next appropriate category to define or click Close.
6. To continue defining other attributes of the drawing view, select the appropriate category. If you have completely defined the drawing view, click OK.