To Export a Drawing to CGM as a Publish Deliverable
1. Open a drawing and click
File >
Save As >
Export. The
Export Setup tab opens.
2. Click CGM on the Configure tab.
3. Click Settings to edit the export settings of the drawing. The Export CGM dialog box opens.
4. Click Abstract coordinates or Metric coordinates under Metafile in.
5. In File structure, select CLEARTEXT (ASCII file) or MILSPEC (binary file).
6. Click OK in the Export CGM dialog box to save the export settings.
7. Click
Preview to preview the drawing and its export settings.
◦ If the drawing preview suits your requirements, you can proceed to the next step.
◦ If the drawing does not suit your requirements:
▪ Click
Close Preview.
▪ Click Settings and again modify the export settings in the Export CGM dialog box.
▪ Preview the drawing again.
8. If the drawing preview suits your requirements, click
Export. The
Save a Copy dialog box opens with
Type set to
CGM (*.cgm).
| You cannot change the file type. |
9. Accept the default name in New file name or type a new file name for the export.
10. Browse and select a folder for the exported drawing.
11. Click OK in the Save a Copy dialog box to export the drawing as a CGM (*.cgm) publish deliverable.
12. Click
Close Export Setup on the
Done tab.