To Create a UV-Curve by Projection
1. Select a surface in the graphics window or on the GTS tree, to project the curve.
2. Click the arrow next to
UV-Curves on the
Create tab and click
UV-Curve by Projection. The
UV-Curve By Projection tab opens and the selected surface is added to the
Surface collector on the tab.
3. To remove the surface, right-click the surface in the Surface collector and click Remove on the shortcut menu.
4. Select a curve or edge in the graphics window or on the GTS Tree, to be projected. The selected curve appears in the Chains collector.
| • Hold down the CTRL key to select more than one curve. • To remove the curve or edge, right-click the curve or edge in the Chains collector and click Remove on the shortcut menu. |
5. To project the curve normal to the selected surface, set Direction to Normal to surface.
6. Alternatively, to project the curve along a specified direction, set Direction to Along direction and select a direction reference such as an edge or curve. The selected reference is added to the direction reference collector.
7. Click
on the
UV-Curve By Projection tab to project the curve on the selected surface.