|
Diagnostics
|
Description
|
Category
|
|
Bad Surfaces
|
These are surfaces with concave domain or singularities. They can produce additional geometry problems during repair. You cannot use such surfaces in regular surface operations.
|
Error
|
|
Bad two-sided edges
|
The incomplete joining of surfaces or joining surfaces that should not be joined create two-sided edges. They are also created when you import models to Creo Parametric with the Join attribute selected. Such two-sided edges can make geometry repair difficult. You cannot repair these edges with the available automatic tools.
|
Error
|
|
Bad wireframe curves
|
Bad wireframe curves are the result of gaps that are improperly defined. They make geometry repair difficult and may not repair with Repair and Match. They can produce bad geometric results after repair.
|
Error
|
|
Poorly tessellated edges
|
They are two-sided edges with bad statistics that may look normal.
|
Warning
|
|
Small loops of one-sided edges
|
Small loops are tiny holes in the quilts. They are the result of missing small surfaces or improper stitching of surfaces, especially when the quilt appears closed but cannot be solidified.
|
Warning
|
|
Short one-sided edges
|
Edge is too small when compared to the model size. They may be small segments of one-sided edges.
|
Warning
|
|
Bad vertices
|
Surfaces and edges that meet at the vertex do not coincide at the vertex.
|
Warning
|
|
Unsatisfied wireframes
|
Gaps added to wireframes are not closed. Unsatisfied wireframes are displayed black.
|
Information
|
|
Unsatisfied Tangency
|
The wireframe edge has an unsatisfied tangency constraint. Wireframes with unsatisfied tangency constraints are indicated by black arrows. They result in smooth geometry when repaired.
|
Information
|
|
Gaps not added to wireframes
|
Gaps are detected, but are not added to the wireframes.
|
Information
|
|
Almost Tangent Edges
|
The surface to which a two-sided edge belongs seems to appear tangential to another surface
|
Information
|
|
Small Surfaces
|
Surfaces with small area and short edges constitute small surfaces. They are not slivers.
|
Information
|
|
Narrow Surfaces
|
Narrow surfaces have small area and long edges. They may be slivers and may not be required in the model.
|
Information
|