To Reuse a Connector Element or Equipment Element
1. Select the connector or equipment element to reuse following either of the methods listed below:
◦ Click
Framework and then in the
Components group, click
Reuse. The
Reuse Component dialog box opens and the
Component to Reuse box is activated. In the model, select a connector or equipment element to reuse or click
to open the
Open dialog box, and then select the connector or equipment element to reuse.
◦ Select a connector or equipment element in the model and click
Framework >
Reuse.
The Reuse Component dialog box opens.
2. Under Instance Type use the options described below to define how to reuse the connector or equipment element:
◦ Existing instance
—Reassembles the connector or equipment element at another location
◦ Copy of an existing instance
—Assembles a copy of the connector or equipment element
3. Click Next. If a copy of an existing instance is to be assembled, the Copy Component Definition dialog box opens.
4. If the Copy Component Definition dialog box opens, you can change names as described below:
◦ In the Name box, you can change the name of the copied component.
◦ Under Components, you can select a check box under Copy and then change the name for the selected subcomponent.
Click OK to complete the copy. The Element Definition dialog box opens.
5. Select the references and enter placement dimensions if required.