匯出設定檔選項
|
數值
|
描述
|
對應組態選項
|
「Recipe 檔案目錄」(Recipe file directory)
|
指定覆蓋 recipe 檔案的位置。
|
||
「針對 ed./.edz 檔案的 Recipe」(Recipe for ed./.edz files)
|
指定用來將工程圖與模型匯出為 .ed 與 .edz 檔案類型的覆蓋 recipe 檔案。
|
||
「'.pvs/.pvz' 檔案的 Recipe」(Recipe for '.pvs/.pvz' files)
|
指定用來將工程圖與模型匯出為 .pvs 與 .pvz 檔案類型的覆蓋 recipe 檔案。
|
||
「以 Creo 顯示為基礎的鑲嵌設定」(Creo display based tessellation settings)
|
|||
「邊顯示品質:」(Edge display quality:)
|
「自動」(Automatic) 或「自訂」(Custom)
「自動」(Automatic) 為預設設定。
若您將值設定為「自訂」(Custom),則選項如下:
• 低 - 減少鑲嵌,但加速顯示。
• 中 - 正常顯示邊,且為預設值。
• 高 - 將鑲嵌增加為 2 倍。
• 很高 - 將鑲嵌增加為 3 倍。
|
對於匯出的鑲嵌,指定其邊的顯示品質設定。
|
edge_display_quality
|
「著色顯示品質:」(Shade display quality:)
|
「自動」(Automatic) 或「自訂」(Custom)
「自動」(Automatic) 為預設設定。
若將值設定為「自訂」(Custom),您可以指定 1 到 50 範圍內的值,3 為預設值。
|
對於匯出的鑲嵌,指定其著色顯示品質設定。
|
shade_quality
|