Using the Cabling Workflow
This workflow is a sample of the basic steps used to create a cabling harness. In the assembly design, click > 
Cabling. You can perform the following operations in Cabling:
Cabling. You can perform the following operations in Cabling:• Create a Harness
Click 
Create Harness to create a new harness assembly. Harnesses are created as standalone assemblies. They can be opened, edited, and reused independently.
Create Harness to create a new harness assembly. Harnesses are created as standalone assemblies. They can be opened, edited, and reused independently.• Import a Logical Reference (Optional)
Click 
Cabling Data > 
Import to read a logical reference file from Creo Schematics or another formatted wire list.
Cabling Data > Import to read a logical reference file from Creo Schematics or another formatted wire list.• Add Spools
Click 
Spools > 
Create Spool to add new spools.
Spools > Create Spool to add new spools.• Designate Components
Click Designate to manually designate 3D parts in the assembly as connectors that will be connected to the harness. If you have referenced logical data from schematics, click 
Auto Designate to automate the designation of components.
Auto Designate to automate the designation of components.• Create Wires and Cables
Click 
Route Cables to open the Route Cables dialog box and add wires and cables to the harness. Click 
to choose the wires and cables imported from the logical data.
Route Cables to open the Route Cables dialog box and add wires and cables to the harness. Click to choose the wires and cables imported from the logical data.• Route Cables
◦ Use a simple route
Select a wire or cable and the From and To coordinates of the components to which you want to connect the wire or cable. The path of the wire or cable is defined by creating location points.
◦ Route via a network
Select Via Network in the Route Type list.
Click 
Route Network to add a network of locations between the components that are connected by the harness. You can create the network before you begin routing or while routing.
Route Network to add a network of locations between the components that are connected by the harness. You can create the network before you begin routing or while routing.◦ Follow an existing cable
Select Follow Cable in the Route Type list. Select a cable to follow and the From and To locations on the cable. You can follow all or a part of the cable.
◦ Follow a pipeline
Select Follow Pipeline in the Route Type list. Select a pipeline to follow and the From and To locations on the pipeline. The cable must enter and exit the pipeline from the pipeline end points or from a junction box.