About a Revolved Surface
Use the Revolve tool to create a surface by revolving a sketched section around a centerline.
• Define the angle of the revolved surfaces using one of the following angle options:
◦ 
Variable—Revolves a section from the sketching plane by a specified angle value.
Variable—Revolves a section from the sketching plane by a specified angle value.◦ 
Symmetric—Revolves a section on each side of the sketching plane by half of the specified angle value in each direction.
Symmetric—Revolves a section on each side of the sketching plane by half of the specified angle value in each direction.◦ 
To Reference—Revolves a section to a selected point, plane, or surface.
To Reference—Revolves a section to a selected point, plane, or surface.• A revolved surface can have open or closed ends. To create a closed volume from the revolved surface, select 
Capped Ends to create additional surfaces that close the ends of the feature.
Capped Ends to create additional surfaces that close the ends of the feature. | The Capped Ends option requires a closed section. |