Changed Default Values of Configuration Options to Improve the Display Quality
Creo Parametric 11.0.0.0
Description
The default values for a set of configuration options have been changed to improve the display quality and enhance the out-of-the-box experience.
This enhancement makes the following changes:
• Increases the tessellation quality for edges
• Increases the shade and edge quality
• Turns off the display of axes, points, coordinate systems, and a spin center
• Dims the edges between tangent surfaces
• Enables the Full Screen Anti-Aliasing (FSAA) functionality
• Prehighlights the Model Tree, the Layer Tree, or the 3D Detail Tree beneath the pointer
• Displays datum features during dynamic spinning
The following graphic shows the default display of a model in Creo Parametric 10.0.0.0:
The following graphic shows the default display of the same model in Creo Parametric 11.0.0.0:
For more information on the changed options and the new values, see Support Article CS402384.
Benefits
This enhancement improves the display quality and the overall user experience.
Additional Information
Tips: | None. |
Limitations: | No known limitations. |
Does this replace existing functionality? | No. |
Configuration option associated with this functionality: | Changed the default values of the following configuration options: • display shade, wireframe, hiddenvis, hiddeninvis, shadewithedges*, shadewithreflect • display_axes yes, no* • display_coord_sys yes, no* • display_points yes, no* • edge_display_quality low, normal, high*, very_high • edge_tess_quality high*, medium, low • enable_fsaa off, 2, 4, 8*, 16 • prehighlight_tree yes*, no • shade_quality 8* • spin_center_display yes, no* • spin_with_part_entities yes*, no • visible_message_lines 1*, <integer> • tangent_edge_display solid, no, centerline, phantom, dimmed* |