Customizing the List of Commonly Used Results
The Contour Plot dialog box for creation of advanced results displays a limited list of commonly used results on the Results type list. Use the following procedure to change the list of commonly used results:
1. Click
Other from the
Results type list to open the
Other Result Types dialog box. Click
![](../../simulate/ansys_simulation/images/uit_expand_image.png)
to expand the dialog box.
2. All advanced results types are shown in the left pane while the commonly used results are shown in the right pane. Select a result from the
All Result Types pane and click
![](../../simulate/ansys_simulation/images/shift_right.png)
to add it to the
Commonly Used pane. Similarly select a result in the
Commonly Used pane and click
![](../../simulate/ansys_simulation/images/shift_left.png)
to remove it from the list.
3. Click
![](../../simulate/ansys_simulation/images/up_arrow.png)
to move a selected result type to higher in the list and
![](../../simulate/ansys_simulation/images/down_arrow.png)
to move a result type to lower down in the list.
4. Click OK to save this setting.