To Create a Fan Curve Offset
To create a fan curve offset, you must first set the configuration option enable_offset_fan_curve to yes. It is set to no by default.
1. Perform one of the following actions:
◦ Select a curve, and click > .
◦ Click > , click
Chain, and then select a curve.
The selected curve appears in the Offset chain collector on the References tab.
| If you are using a chain set as a reference and you want to modify it, click Details on the References tab and use the Chain dialog box. |
2. Under
Offset Method, select
Fan Curves to create a fan curve offset.
3. When you select a chain, the quilt or surface on which the offset chain is located is automatically selected as the reference surface.
If you want to select a different surface, right-click the
![](../../part_modeling/part_modeling/images/extrev_surf16x16.png)
reference surface collector, click
Remove, and select a reference quilt or surface.
4. Click the
2nd curve collector and select a second curve as a reference.
| To create another curve, pause the Offset Curve tool by clicking ![](../../part_modeling/part_modeling/images/dash_pause.png) . Create another curve and click ![](../../part_modeling/part_modeling/images/dash_resume.png) to resume the Offset Curve tool. |
5. Click the
Measurement plane collector and select a measurement plane.
6. Type the number of curves you want to create in the Number of curves box.
7. Click
OK to complete the offset chain.