To Specify the Trajectory Curve for a 2-Axis Trajectory Milling Step
This procedure describes how you can specify a trajectory curve and offsets for a 2-axis Trajectory Milling step in Process Manager.
1. Select the trajectory milling step in the Process Manager and click
![](../../manufacturing/nc/images/ncfm_edit.png)
on the toolbar below the Process Table. The
Curve Trajectory tab opens.
2. On the References tab, click in the Machining Reference collector and select a single curve feature that lies in a plane normal to the z-axis of the step coordinate system.
You can also asynchronously sketch a curve at this point and select it for the sequence trajectory. A yellow arrow indicates the direction of the trajectory in the graphics window.
Alternatively, right-click the graphics window and select Trajectory Curve to activate the Machining Reference collector.
3. Click Details to select related edges or curves and to place them into a group or chain.
4. Click
![](../../manufacturing/nc/images/dash_done.png)
when finished.