To Customize the Display of Measurement Results
1. To set the Measure dialog box to open fully expanded, set the measure_dialog_expand configuration option to yes. Otherwise, the dialog box will open in the same condition as it was the last time it closed, either expanded or collapsed.
2. Click > 
Measure. The Measure dialog box opens.
Measure. The Measure dialog box opens.3. Click 
. The Options dialog box opens.
. The Options dialog box opens.4. Customize the display settings:
◦ Set the display of the results in the Measure dialog box:
▪ To use the same units as the model, select the Units by Model check box.
▪ Select a unit for length from the Length Units list.
▪ Select a unit for angle from the Angular Units list.
▪ Select the number of decimal place shown from the Decimal Places list.
◦ To show the Feature tab in the Measure dialog box, select the Show Feature Tab check box.
◦ Customize the measurement panel display:
▪ To hide the measurement panels, click Hide.
▪ To restore the hidden measurement panels, click Restore.
▪ To collapse the measurement panels, click Collapse.
▪ To expand the collapsed measurement panels, click Expand.
5. Click OK.