Using Queries to Search for Parts or Bodies by Material Assignment
Using the queries, you can search for parts and bodies on the Model Tree by their material assignment.
Before you use queries, click 
and select the Simple Search check box to display the search box on the Model Tree.
and select the Simple Search check box to display the search box on the Model Tree.Use the procedure below to search for parts or bodies by material assignment:
1. Click the drop-down arrow next to the search box.
2. Click > .
3. Select one of the available commands.
The following table describes the available commands and the related query:
Command | Description |
|---|---|
Parts Missing Density | Searches for parts where at least one body has assigned material with missing density. This command is available only in Assembly mode. |
Bodies Missing Density | Searches for bodies where the assigned material has missing density. |
Parts with Default Material | Searches for parts where the master material or bodies with assigned material is the default material, PTC_SYSTEM_MTRL_PROPS. This command is available only in Assembly mode. |
Bodies with Default Material | Searches for bodies with the default material, PTC_SYSTEM_MTRL_PROPS. |
The search results are displayed on the Model Tree based on the filter 
and the search 
options.
and the search options.