To Show Cables as Thick or Centerline
1. Click > > . The Model Display dialog box opens.
2. Under Display on the General tabbed page, select or clear:
◦ Reference designators—To change the display of reference designators of cabling connectors and ECAD components.
◦ Internal cable portions—To change the display of cable portions that are inside cabling components.
3. Under Cable Display on the Edge/Line tabbed page, select or clear:
◦ Thick—To display cables with 3-D thickness to show shading.
◦ Centerline—To display the cable centerline with location points shown in green.
4. Click OK to save the changes and remove the dialog box, or Apply to save the changes and leave the dialog box displayed.