To Plot Using a Projection Layout View
After you click File > Print > Quick Drawing, the Quick Drawing dialog box opens. Follow the procedure below when you select Projection Layout as your View Layout Definition.
1. In the Plot Config File box, type the path to your plotter configuration .pcf file or click Browse and select the file.
* 
If you have set the configuration option quick_print_plotter_config_file, the path to the plotter configuration file is automatically defined. You can override the configuration option by typing a path to or browsing to another .pcf file.
2. Click Portrait or Landscape to specify the orientation of the sheet, and click the Standard Sizes box to select the size of the sheet.
3. To use the same view scale and display style for all views, click the Use View Scale for all views and Use Display Style for all views check boxes. Note the View Scale and Display Style defaults for the Main View are listed in the Views area of the dialog box.
* 
To assign unique view scales and display styles, clear these check boxes.
4. Click the Saved View Name box for the Main view and select another name, or keep the default Standard Orientation name.
5. Click in the View Scale and Display Style boxes to select a new values or style, or accept the defaults for the Main view.
6. In the View Layout area click the projection views you want. Projection views determine view layout and positioning.
* 
Projection views are the unlabeled boxes in the View Layout area.
7. Click a general view if needed. Each general view is listed in the Views area of the dialog box.
If you selected Use View Scale for all views or Use Display Style for all views, the values for View Scale and Display Style initially default to the values for Main. If you change a value for View Scale or Display Style for the Main View or any general view, then that value changes for all views listed.
If you cleared Use View Scale for all views and Use Display Style for all views check boxes, then you can make changes for Main or any general views, without affecting other values.
8. Click OK to plot the part or assembly.
* 
If the plotter configuration file cannot be found, is missing required values, or is generating plotter errors, then an error dialog box opens after you click OK. Depending on the error, you can redirect to the correct plotter configuration file or edit the plotter configuration file from the dialog box.
If you have defined a model grid, and you are plotting a Projection Layout view or Manual Layout view, the model grid is automatically plotted for all views with the correct orientation. For information on defining a model grid, see Detailed Drawings help.
Was this helpful?