To Offset a Segment Surface
1. Click Model > Offset. The Offset tab opens.
2. Select a quilt or surface as a reference for the offset.
* 
Alternatively, you can first select the geometry and then click Offset.
3. To create a board surface, make sure Surface is selected under Type and As Segment under Offset Type.
4. Type a value in the Offset box to set the offset distance. Click to flip the offset direction.
5. For a first segment, type a value for the segment thickness in the box, or accept the default value. Click to change the thickness direction.
6. Click Options. The Options tab opens. Perform any of the following operations:
Click the Special Handling collector and select one or more surfaces to exclude. You can also click the Special Handling collector under Options to exclude surfaces.
For more information about excluding surfaces, search the Help Center.
Click Add bends on sharp edges to round sharp edges when the sketch includes nontangent geometry. Set the value of the radius and the location for dimensioning the radius.
Click Merge to model to merge the segment with intersecting segments.
To keep the new segment edges from merging with existing intersecting segments, click Keep merged edges.
To keep edges between bend surfaces in the offset segment, click the Keep edges of bends box
Click Do not merge to model to keep the new geometry as a distinct segment.
To flip the driving surface of the new segment click Set driving surface opposite offset surface.
8. Click .
Was this helpful?