To Copy a Hatch Pattern to a Sectioned Body or Component
You can copy hatch pattern from a sectioned hatch to a body or a component.
1. Open a drawing.
2. Double-click or right-click and click Properties on the shortcut menu. The MOD XHATCH menu appears on the Menu Manager.
3. Click X-Body. Use the following options to select the hatch pattern:
◦ Pick—Selects multiple hatch patterns.
◦ Next—Selects the next hatch pattern.
◦ Previous—Selects the previous hatch pattern.
4. Select the Copy Hatch command while in X-Body or X-Component mode and select the hatch pattern that you want to copy.
5. Click Done.