使用介面匹配放置元件
1. 在開啟的組件中,按一下
「組裝」(Assemble)。
「開啟」(Open) 對話方塊開啟。
2. 選取要放置的元件,然後按一下「開啟」(Open)。「元件放置」(Component Placement) 標籤開啟。
3. 若要使用非預設介面的其他介面,請從「已配置的介面」(Configured Interfaces) 清單中選取。
4. 按一下「選項」(Options)。「選項」(Options) 標籤開啟。選取所有需要的選項:
◦ 「包括暫時介面」(Include temporary interfaces) - 使用暫時介面。
◦ 「包括子模型介面」(Include sub model interfaces) - 使用所有子模型中的介面。
◦ 檢查介面標準 (Check Interface Criteria) - 檢查是否符合標準。
◦ 檢查匹配干涉 (Check interference of matches) - 匹配不干擾其他元件的介面。
5. 選取「介面放置」(Interface Placement) 選項並使用「介面至介面」(Interface To Interface) 或「介面對幾何」(Interface to Geometry) 繼續進行放置。
介面對介面匹配
1. 依預設,從條件約束清單中選取「介面至介面」(Interface To Interface)。
2. 按一下組件中每次出現的介面 (以
標示)。該元件每次出現都置於此位置。
3. 若要新增該元件的另一個實例,請在圖形視窗中按一下滑鼠右鍵,選取捷徑功能表中的「新建位置」(New Location),或按一下「放置」(Placement) 標籤中的「新建位置」(New Location)。
4. 若要自動放置出現多次的元件,請按照下列步驟進行:
5. 按一下
「自動放置」(Auto Place)。
「自動放置」(Auto Place) 對話方塊開啟。
6. 選取自動放置選項:
◦ 在啟動組件中搜尋位置 (Search for locations within the active assembly) - 使用介面對介面匹配方式,在組件中搜尋放置位置。
◦ 選取要定義搜尋範圍的項目 (Select items to define the search scope) - 在組件位置搜尋區中搜尋元件或介面。定義區域。
7. 按一下「開始尋找」(Find Now)。找到的位置會出現在「找到位置」(locations found) 清單中。
8. 從
「找到位置」(locations found) 清單中選取一個位置,然後按一下
將其移到
「選取位置」(locations selected) 清單中。元件即置於組件中的這個位置。
9. 按一下「偏好設定」(Preferences) 變更「最大位置數」(Max. number of locations) 以在清單中顯示更多的放置位置。
介面對幾何匹配
1. 從「介面放置」(Interface Placement) 清單中選取「介面對幾何」(Interface to Geometry)。
2. 選取組件幾何位置參照。
3. 若要新增該元件的另一個實例,請在圖形視窗中按一下滑鼠右鍵,選取捷徑功能表中的「新建位置」(New Location),或選取「放置」(Placement) 標籤中的「新建位置」(New Location)。
4. 若要自動放置出現多次的元件,請按照下列步驟進行:
5. 按一下
「自動放置」(Auto Place)。
「自動放置」(Auto Place) 對話方塊開啟。
6. 選取自動放置選項:
◦ 螢幕點 (Screen point) - 搜尋最接近的可用位置。在組件中按一下。
◦ 選取要定義搜尋範圍的項目 (Select items to define the search scope) - 在組件位置搜尋區中搜尋元件或特徵。定義區域。
7. 按一下「開始尋找」(Find Now)。找到的位置會出現在「找到位置」(locations found) 清單中。
8. 從
「找到位置」(locations found) 清單中選取一個位置,然後按一下
將其移到
「選取位置」(locations selected) 清單中。元件即置於組件中的這個位置。
9. 按一下「偏好設定」(Preferences) 變更「最大位置數」(Max. number of locations) 以在清單中顯示更多的放置位置。
「兩個介面」匹配選項
1. 按一下「關閉」(Close) 接受位置定義。
2. 按一下
。