Creo Ansys Simulation—Non Linear Materials
Creo Parametric 10.0.0.0
User Interface Location: Ansys Simulation
Videos
Description
The following functionality is now supported. in Creo Ansys Simulation:
• Neo-Hookean hyperelasticity—This is used for plastic and rubber materials. Models with these materials can be used to study nonlinear stress and strain behavior with large deformations.
 |  |
Large Deformation Study of a model with Neo-Hookean hyperelastic material.
• Linear orthotropic elasticity—Supported by models that have transversely isotropic materials. This is usable for woods, rolled materials, and any material that depends on direction.
• Bi-linear plasticity—Usable in large strain analysis. Elastoplastic materials can be defined using the Linear Hardening law.
Stress-Strain Curve for bilinear elastoplastic material.
A Creo Ansys Advanced license is required for support for all the nonlinear material types.
Benefits
This enhancement supports creation of non linear materials and allows many use cases for different types of studies with a simple set up. Nonlinear materials created in Creo Parametric too are recognized and usable in Creo Ansys Simulation
Additional Information
Tips: | None. |
Limitations: | No known limitations. |
Does this replace existing functionality? | No. |
Configuration option associated with this functionality: | None. |