Change the Sequence of Plies
1. On the Laminate Tree, click 
Laminate Manager.
Laminate Manager.2. Select PLY_1.
3. Press Shift and select PLY_6. All laminate objects are selected.
4. Right-click and select Properties. The Laminate Objects Properties dialog box opens.
5. Select Change sequence and specify the following settings:
a. In the Prefix box, type Seq.
b. In the Start box, type 1.
c. In the Step box, type 1, and then press Enter.
6. Click OK.
7. Click in the empty space in the graphics window.
In the Laminate Tree, updated sequences appear in the Sequence column.
