Cabin Radiation with Convection and Radiation: Exercise 5—Creating Monitoring Points
1. Create two monitoring points.
2. In Results, under Monitoring Points right-click Point 01.
3. Select Rename and in the New Name box type Window_Point.
4. In the Properties panel, Model tab, set Position to 1.7, 0, 1.5 m.
5. In Results, under Monitoring Points right-click Point 02.
6. Select Rename and in the New Name box type Chair_Point.
7. In the Properties panel, Model tab, set Position to 0, -1.12, 0.7 m.
8. In the Functions panel click 
Turn on/off view properties and select 
Hidden Line from the list. The monitoring point appears as shown in the image.
Turn on/off view properties and select Hidden Line from the list. The monitoring point appears as shown in the image.