Mesh Tab
Use this tab on the Simulation Display dialog box to control the appearance of meshes generated in native mode and FEM mode. Depending on which mode you are working in, the content of the tab changes.
Native Mode
After you generate a mesh using the
AutoGEM command,
Creo Simulate displays all mesh elements by default. You can hide them by clicking the
Clear All button on the tab or by turning off individual entities from the following list:
|
• Mesh Points
• Solids
• Shells
|
• Beams
• Links
• Bonding Elements
|
You can control the size of mesh entities and the quality of mesh display using the
Mesh Display area on the
Mesh tab of the
Simulation Display dialog box.
FEM Mode
The FEM version of the tab provides the following options for you to control the FEM mesh display: