Report Table Parameters Applicable to Piping

Piping > Design Rule Checking and Piping (Report) Information > Report Tables in Non-Spec Driven Piping > Report Table Parameters Applicable to Piping

Linestock Parameters

Parameter Name	Definition
&asm.mbr.pipe.stock.name	Lists name(s) of line stock(s).
&asm.mbr.pipe.stock.User Defined	Lists specified parameters for the line stock.
&asm.mbr.pipe.stock.line.name	Lists names of all pipelines using each line stock.
&asm.mbr.pipe.stock.line.User Defined	Lists parameters for the pipeline using the specified line stock.
&asm.mbr.pipe.stock.material	Lists material for all line stocks.
&asm.mbr.pipe.stock.OD	Lists outer diameter for line stocks.
&asm.mbr.pipe.stock.wallthick	Lists wall thickness for line stocks.
&asm.mbr.pipe.stock.len.pre_cut	Lists total precut length of each line stock.
&asm.mbr.pipe.stock.len.center	Lists total centerline length of each line stock.

Pipeline Parameters

Parameter Name	Definition
&asm.mbr.pipe.line.segment.stock.name	Lists names of line stocks for each segment in the pipeline.
&asm.mbr.pipe.line.segment.stock.User Defined	Lists parameters for line stocks of which the pipeline is made.
&asm.mbr.pipe.line.name	Lists names of all pipelines.
&asm.mbr.pipe.line.User Defined	Lists parameters for each pipeline.
&asm.mbr.pipe.line.stock.name	Lists names of line stocks used in each pipeline.
&asm.mbr.pipe.line.stock.User Defined	Lists parameters for line stocks used in pipeline.
&asm.mbr.pipe.line.len.pre_cut	Lists precut length of each pipeline.
&asm.mbr.pipe.line.len.center	Lists centerline length of each pipeline.
&asm.mbr.pipe.line.segment.name	Lists names of all segments in pipeline.
&asm.mbr.pipe.line.segment.solid_name	Lists names of all solids (if defined) in pipeline.
&asm.mbr.pipe.line.segment.len.pre_cut	Lists precut length of segments in pipeline.
&asm.mbr.pipe.line.segment.len.center	Lists centerline length of segments in pipeline.
&asm.mbr.pipe.line.segment.clk_ang.ang	Lists clocking angle value from evaluate feature.
&asm.mbr.pipe.line.segment.clk_ang.cs1	Lists name of initial coordinate system for each clocking angle.
&asm.mbr.pipe.line.segment.clk_ang.cs2	Lists name of final coordinate system for each clocking angle.

User Defined Parameters

The following Line Stock parameters are displayed as User Defined parameters.

• STOCKNO

• MATERIAL

• GRADE

• X_SECTION_TYPE (rectangular or circular)

• SECTION_TYPE (hollow or solid)

• RECTANGULAR_HEIGHT

• RECTANGULAR_WIDTH

• RECTANGULAR_ANGLE

• OD

• WALL_THICKNESS

• SHAPE (straight OR flexible)

• CORNER_TYPES (fitting, bend, or miter cut)

• WT_LEN (weight/length)

• BEND_RADIUS

• BEND_ANGLE

• MITTER_CUT_LEN

• MITER_CUT_NUM

The following Design Rule parameters are displayed as User Defined parameters

• MAX_OVERALL_LENGTH

• MIN_SEGMENT_LENGTH

• MAX_SEGMENT_LENGTH

• MAX_NUMBER_BENDS

• MIN_BEND_SEPARATION

• MIN_STRAIGHT_LENGTH_END

• MIN_BEND_RADIUS

• MAX_BEND_RADIUS

• MIN_BEND_ANGLE

• MAX_BEND_ANGLE

• BEND_ARC_THRESHOLD

• MIN_BRANCH_SEPARATION

• MIN_BRANCH_ANGLE

• BEND_TABLE_NAME

Pipe Segment Parameters

Parameter Name	Definition
&asm.mbr.pipe.segment.name	Lists system default name of the pipeline segments.
&asm.mbr.pipe.segment.solid_name	Lists solid part name for each segment (if defined).
&asm.mbr.pipe.segment.stock.name	Lists line stock used in each segment.
&asm.mbr.pipe.segment.stock.User Defined	Lists parameters in line stocks assigned to each segment.
&asm.mbr.pipe.segment.line.name	Lists name of pipeline to which each segment belongs.
&asm.mbr.pipe.segment.line.User Defined	Lists pipeline parameters for each segment.
&asm.mbr.pipe.segment.len.pre_cut	Lists precut length of each segment.
&asm.mbr.pipe.segment.len.center	Lists centerline length of each segment.
&asm.mbr.pipe.segment.segfrom	Lists location from which each pipeline segment in the assembly is routed. This is the component to which the from entry port belongs.
&asm.mbr.pipe.segment.segto	Lists the location to which each pipeline segment in the assembly is routed. This is the component to which the to entry port belongs.
&asm.mbr.pipe.segment.clk_ang.ang	Lists clocking angle value of evaluate feature.
&asm.mbr.pipe.segment.clk_ang.cs1	Lists name of initial coordinate system for each clocking angle.
&asm.mbr.pipe.segment.clk_ang.cs2	Lists name of final coordinate system for each clocking angle.

Pipeline Segment Bend Information Parameters

Parameter Name	Definition
&asm.mbr.pipe.segment.csys.bend.User Defined	Lists a user-defined bend parameter.
&asm.mbr.pipe.segment.csys.bend.bend_name	Lists the bend name created by the system.
&asm.mbr.pipe.segment.csys.bend.loc_angle	Lists bend angle.
&asm.mbr.pipe.segment.csys.bend.loc_num	Lists bend location bend number.
&asm.mbr.pipe.segment.csys.bend.loc_radius	Lists bend radius.
&asm.mbr.pipe.segment.csys.bend.loc_x	Lists x-offset bend location information.
&asm.mbr.pipe.segment.csys.bend.loc_y	Lists y-offset bend location information.
&asm.mbr.pipe.segment.csys.bend.loc_z	Lists z-offset bend location information.
&asm.mbr.pipe.segment.csys.bend.mach_bend	Lists bend machine bend angle.
&asm.mbr.pipe.segment.csys.bend.mach_num	Lists bend machine bend number.
&asm.mbr.pipe.segment.csys.bend.mach_offset	Lists bend machine offset.
&asm.mbr.pipe.segment.csys.bend.mach_radius	Lists bend machine bend radius.
&asm.mbr.pipe.segment.csys.bend.mach_twist	Lists bend machine twist angle.
&asm.mbr.pipe.segment.csys.name	Lists coordinate system name for segment bend information.
&asm.mbr.pipe.segment.mach_csys.bend.User Defined	Lists a user-defined bend parameter.
&asm.mbr.pipe.segment.mach_csys.bend.bend_name	Lists the bend name created by the system.
&asm.mbr.pipe.segment.mach_csys.bend.mach_bend	Lists bend machine bend angle.
&asm.mbr.pipe.segment.mach_csys.bend.mach_num	Lists bend machine number.
&asm.mbr.pipe.segment.mach_csys.bend.mach_offset	Lists bend machine offset.
&asm.mbr.pipe.segment.mach_csys.bend.mach_radius	Lists bend machine radius.
&asm.mbr.pipe.segment.mach_csys.bend.mach_twist	Lists bend machine twist angle.
&asm.mbr.pipe.segment.mach_csys.name	Lists name of coordinate system with bend machine information.
&asm.mbr.pipe.segment.loc_csys.bend.User Defined	Lists a user-defined bend parameter.
&asm.mbr.pipe.segment.loc_csys.bend.bend_name	Lists the bend name created by the system.
&asm.mbr.pipe.segment.loc_csys.bend.loc_angle	Lists bend location bend angle.
&asm.mbr.pipe.segment.loc_csys.bend.loc_num	Shows bend location bend number.
&asm.mbr.pipe.segment.loc_csys.bend.loc_radius	Lists bend location bend radius.
&asm.mbr.pipe.segment.loc_csys.bend.loc_x	Lists x-offset bend location information.
&asm.mbr.pipe.segment.loc_csys.bend.loc_y	Lists y-offset bend location information.
&asm.mbr.pipe.segment.loc_csys.bend.loc_z	Lists z-offset bend location information.
&asm.mbr.pipe.segment.loc_csys.name	Lists coordinate system name for segment bend location information.

Holes Report Parameters

Parameter Name	Definition
&asm.mbr.pipe.segment.holes.holes_params.hole_num	List holes report number.
&asm.mbr.pipe.segment.holes.holes_params.hole_offset	List holes report offset.
&asm.mbr.pipe.segment.holes.holes_params.hole_angle	List holes report angle.
&asm.mbr.pipe.segment.holes.holes_param..hole_diam	List holes report diameter.

Was this helpful?