Defining a Trajectory Using a Composite Curve
You can use a composite curve created by offsetting or projecting edge geometry as the trajectory in trajectory based tools. After you select the curve, you can change the start point.
 |
This functionality is not available for the Blend tool.
|
1. In Sketcher, create or select the composite curve that you want to use as the trajectory, and use one of the following options:
◦ Right-click and then select Start Point.
◦ Click > > .
2. When there is more than one possible start point, right-click and under Preselection Options, use the arrows or click 
to open the Pick From List dialog box. Select a different vertex as the start point of the trajectory.
to open the Pick From List dialog box. Select a different vertex as the start point of the trajectory.3. To accept the selection and return to the feature tool, click 
.
.