To Define a Round Transition
This topic is a general procedure. Some transitions require you to go to an additional topic to complete the procedure.
1. Select the references for the round and click > . The Round tab opens.
2. Under
Mode, click
Transitions, or right-click and choose
Show transitions to switch to Transition mode. Previews of the transitions are displayed.
3. In the graphics window, select the transition to define.
4. Select a transition type from the box or from the shortcut menu. The transition is previewed.
5. To fill gaps between the active transition and part geometry for the
Blend,
Continue,
Intersect,
Round Only 1, or
Round Only 2 options, click
Capped on the
Round tab. The transition is defined.