Configuration Options
Use the following configuration options to specify local topology optimization settings. The values of the configuration options define the default settings for options in the Generative Design Options dialog box. An asterisk indicates the default.
|
Configuration Option
|
Values
|
Description
|
Related Option in Generative Design Options dialog box
|
||
|---|---|---|---|---|---|
|
generative_auto_optimization
|
yes, no*
|
Set to yes to automatically start local topology optimization as soon as the study is fully defined.
|
When set to yes, the Start optimization automatically check box is selected by default.
|
||
|
generative_refresh_interval
|
Type a value for seconds
5*
|
Set the frequency in seconds of the preview refresh rate for the analysis in progress.
|
Sets the value for Refresh interval.
|
||
|
generative_number_cores
|
Type a value for the number of cores
0*
|
Set the number of CPU cores to use during generative computations.
If the value is 0, the number of cores is managed by the system.
|
Sets the value for Cores to use.
|
||
|
generative_final_fea
|
yes*, no
|
Set to yes to perform higher fidelity FEA on the generated optimized result.
For more accurate results, run the FEA in the Simulation application.
|
Sets the value for Perform final simulation pass.
|
Use the following configuration options to set the animation speed and scale. The values of these configuration options define the default settings for options in the Animation Deformation Settings dialog box.
|
Configuration Option
|
Values
|
Description
|
Related Option in Animation Deformation Settings dialog box
|
|---|---|---|---|
|
generative_animation_speed
|
The valid values range from 0.5 to 10.
The default value is 1.
|
Specifies the animation speed for the FEA deformation.
|
Sets the value for Speed.
|
|
generative_ animation_scale
|
The valid values range from 1 to 100.
The default value is 5.
|
Specifies the animation scale for the FEA deformation.
|
Sets the value for Scale.
|