About Measuring Geometry
Use the Measure tool to measure a model or entities that you select within a model. You can measure the following measurement types:
• All the types of measurements that are relevant for the selected reference entities, called Summary mode
• Length of a curve, edge, or a chain of curves or edges
• Distance and maximum distance between two entities
• Angle between two linear entities
• Diameter of a cylindrical or conical surface
• Area of a surface, quilt, facet, body, or model, and total area
• Volume of a body, model or closed quilt
• Transformation matrix between two coordinate systems
After you measure, you can use the measurement by performing these actions:
• Copy a measurement result so you can paste it
• Save the measurement as a feature in the Model Tree
• Save a measurement as a saved analysis