Harness > Harness Related Drawing Report Table Parameters
Harness Related Drawing Report Table Parameters
You can use several Drawing Report table parameters in Cabling, cabling assemblies and flat harnesses. You can also use an item's parameters as user-defined parameters in a report table.
Perform the following steps to set the model before creating a table. Using this table, you can access the parameters.
1. Open the required drawing and click Drawing Models. The DWG MODELS menu appears.
2. Click Add Model to add a new part or assembly to the drawing. The selected model becomes the default or current model.
3. If you have added multiple parts or assemblies, click Set Model to set the required harness part or flat assembly as the current model.
The report parameters in the following table use cond to refer to all wires and cable conductors in a harness and run to refer to all wires and cables in a harness. The term from/to indicates that the parameter exists for both From and To directions. The User Defined category indicates that you can specify user-defined parameters and also system parameters.
For example, although &harn.run.spool.color is not specifically defined, you can specify &harn.run.spool.UserDefined and type the system parameter color.
Report Parameters
Parameter Name
Definition
&asm.mbr.cblprm.User Defined
Lists the specified user-defined parameter in the cabling components
&asm.mbr.cblprms.name
Lists names of all the user-defined parameters in the cabling components
&asm.mbr.cblprms.value
Lists values of all user-defined parameters in the cabling components
&asm.mbr.connprm.name
Lists reference designators of connectors in the assembly
&asm.mbr.connprm.pin.name
Lists names of pins for each connector in the assembly
&asm.mbr.connprm.pin.run.cond.color
Lists the color of the wires and conductors connected to each connector pin
&asm.mbr.connprm.pin.run.cond.name
Lists name of the conductors and wires connected to each pin
&asm.mbr.connprm.pin.run.cond.strip.len
Lists the strip length of wires and conductors attached to each pin
&asm.mbr.connprm.pin.run.cond.User Defined
Lists the specified user-defined parameter in conductors or wires, connected to each pin
&asm.mbr.connprm.pin.run.len
Lists the length of wires and cables connected to each pin
&asm.mbr.connprm.pin.run.name
Lists the names of wires, cables, or bundles connected to each connector pin
&asm.mbr.connprm.pin.run.spool.name
Lists spool names of wires or cables connected to each connector pin
&asm.mbr.connprm.pin.run.spool
User Defined
Lists the specified user-defined spool parameter of wires and cables connected to each pin
&asm.mbr.connprm.pin.run
User Defined
Lists the specified user-defined parameter for wires and cables connected to each pin
&asm.mbr.connprm.pin.signal.name
Lists signal names of each pin
&asm.mbr.connprm.pin.signal.type
Lists signal types of each pin
&asm.mbr.connprm.pin.term.name
Lists the terminator name of each pin
&asm.mbr.connprm.pin.term.User Defined
Lists the user-defined parameters set for the terminators
&asm.mbr.connprm.User Defined
Lists values of the specified user-defined parameter for each connector
&asm.mbr.connprm.pin.entry_port
Lists the entry port parameter of each pin for each connector
&asm.mbr.connprm.pin.signal.User Defined
Lists the specified user-defined parameter for each pin
&asm.mbr.cparams.name.User Defined
Lists the names of all user-defined parameters in the assembly components
&asm.mbr.cparams
Lists the specified user-defined parameters used in the assembly components
&asm.mbr.cparams.value
Lists the values of all user-defined parameters in an assembly component
&asm.mbr.name
Lists the names of assembly members
&asm.mbr.param.name
Lists the names of all user-defined parameters in an assembly member
&asm.mbr.param.value
Lists the values of all user-defined parameters in an assembly member
&asm.mbr.type
Lists the type (part, assembly, or terminator) of an assembly member
&asm.mbr.User Defined
Lists the specified user-defined parameter for the respective assembly components
&harn.run.cond.color
Lists the color for every routed wire or cable in the harness
&harn.run.cond.from/to.conn.name
Lists connector reference designators that every wire or cable conductor is routed from or to
&harn.run.cond.from/to.pin.name
Lists pin names that every wire or cable conductor is routed from or to
&harn.run.cond.from/to.pin.entry_port
Lists the pin entry port for every wire or cable conductor
&harn.run.cond.from/to.pin.sig.name
Lists the pin signal name for every wire or cable conductor
&harn.run.cond.from/to.pin.sig.type
Lists the pin signal type for every wire or cable conductor
&harn.run.cond.from/to.pin.sig.User Defined
Lists the specified user-defined pin parameter for every wire or cable conductor
&harn.run.cond.from/to.strip.len
Lists the strip length of each wire or cable conductor
&harn.run.cond.from/to.term.name
Lists the terminator name for every wire or cable conductor
&harn.run.cond.name
Lists every routed wire or cable conductor in the harness
&harn.run.cond.User Defined
Lists the specified user-defined parameter for every wire or cable conductor in the harness
&harn.run.from/to.conn.name
Lists connector reference designators that every wire and cable is routed from or to
&harn.run.from/to.conn.User Defined
Lists the specified connector user-defined parameter that every wire or cable is routed from or to
&harn.run.len
Lists lengths of routed wires or cables
&harn.run.name
Lists names of routed wires or cables
&harn.run.spool.name
Lists the spool name for every routed cable or wire
&harn.run.spool.User Defined
Lists the specified user-defined spool parameter for every wire or cable
&harn.run.subharn.name
Lists subharness names used
&harn.run.User Defined
Lists the specified user-defined wire, cable or bundle parameter for every harness
&harn.term.name
Lists all terminator names used in the harness
&harn.term.qty
Lists the numbers of every terminator instances used in the harness
&harn.term.User Defined
Lists the specified user defined parameter for every terminator used in the harness
&harn.spool.len
Lists the total lengths of routed wire spools and cable spools
&harn.spool.name
Lists the wire or cable spool names used
&harn.spool.User Defined
Lists the specified user defined parameter for every wire or cable spool used
The following conditions apply:
Report Parameter
Active Model
Attribute
&harn...
Harness part
NA
&asm.mbr.cblprm(s)...
3D assembly
Cable Info
&asm.mbr.connprm...
3D assembly/Flat assembly
NA
* 
The Cable Info attribute is available only when you select at least one cable parameter in the repeat region.
To assign a different model to a region:
1. Click Table > Repeat Region. The TBL REGIONS menu appears.
2. Click Model / Rep to display a different model or simplified representation to control a region. If you change the model associated with the repeat region, the repeat region is populated with the respective data.
3. Select a region. The Open dialog box opens.
4. Select a new part or assembly to be associated with the repeat region.
Was this helpful?