Cabling > Using Parameters in Cabling > Cabling Parameters
Cabling Parameters
The following is a list of cabling parameters arranged by object.
Component Parameters
REF_DES\(Text String)
MODEL_NAME\(Text String)
NUM_OF_PINS\(Integer)
TYPE\(Text String)
CONN_PLUG (Text String)
USER_DEFINED (Text String)
OBJ_TYPE (Text String)
DEF_INTERNAL_LENGTH (Integer)
DEF_GROUPING
When using Creo Schematics logical data, if the GROUPING parameter is not available, Cabling refers to the DEF_GROUPING parameter of the port.
If the DEF_GROUPING parameter for the port is not available, Cabling refers to the DEF_GROUPING parameter in the component level and applies it to the entry port TYPE parameter.
If none of the above-mentioned parameters are available in the XML file, Cabling automatically sets the value for the entry port TYPE parameter as ROUND.
TABLE_AUTO_ASSIGN (True/False)
Connection Parameters
NAME (Text String)
SPOOL (Text String)
REF_DES_FROM (Text String)
ENTRY_PORT_FR (Text String)
REF_DES_TO (Text String)
ENTRY_PORT_TO (Text String)
MAX_ALLOWED_LENGTH (Integer)
MAX_ALLOWED_DST (Integer)
TARGET_LENGTH (Integer)
FROM_TO_CABLE_REPORT_NAME (Text String)
TO_CABLE_REPORT_NAME (Text String)
FROM_CABLE_REPORT_NAME (Text String)
USE_PATH (Text String)
NETWIRE (Integer)
MIN_ALLOWED_DIST (Integer)
TYPE (Text String)
Pin Parameters
SIGNAL_NAME (Text String)
SIGNAL_VALUE (Text String)
ENTRY_PORT (Text String)
TERM_NAME (Text String)
TERM_AUTO_ASSIGN (True/False)
CABLE_NAME_SHIELD (Text String)
PLUG_MODEL_NAME (Text String)
PIN_NAME (Text String)
CABLE_NAME_# (Text String)
COND_ID_# (Integer)
TABLE_AUTO_ASSIGN (True/False)
TERM_PIN_ID (Integer)
Entry Port Parameters
TYPE (ROUND, FLAT, WIRE)
INT_LENGTH (Integer)
LINK (Text String, another entry port's name)
Bundle Parameters
NAME (Text String)
BUNDLE_TYPE (ROUND, FLAT)
MIN_BEND_RADIUS (Integer)
THICKNESS (Integer)
SPOOL(Text String)
SHEATH SPOOL(Text String)
ADDITIONAL NAMES (Text String)
ASSIGNED_MIN_BEND_RADIUS
ASSIGNED_THICKNESS(Integer)
LINESTYLE
MATERIAL DENSITY (Integer)
MIN_ALLOWED_LENGTH (Integer)
MAX_THICKNESS (Integer)
MIN_ALLOWED_DIST (Integer)
OVERLAP_FACTOR
Conductor Parameters
WIRE_NAME (Text String)
STRIP_LENGTH_FROM (Text String)
AUTO_ASSIGN_FROM (Text String)
STRIP_LENGTH_TO (Text String)
AUTO_ASSIGN_TO (Text String)
COLOR (Text String) (If a string matches the string present in View > Appearances, cables are displayed in that color.)
LINESTYLE (Text String) (solidfont, dotfont, and so on)
Was this helpful?