To Show Geometric Tolerances
You can show geometric tolerances that were created in the Part and Assembly modes of the model.
1. On the Annotate tab, click 
Show Model Annotations. The Show Model Annotations dialog box opens.
Show Model Annotations. The Show Model Annotations dialog box opens.2. Click the 
tab.
tab.3. Select geometric tolerances from the list and click OK. The selected geometric tolerances are displayed in the drawing.
4. Click Close to close the Show Model Annotations dialog box.
 | You can erase or delete geometric tolerances that are shown in drawings. If you delete a shown geometric tolerance it is deleted in both the drawing and the model. |