To Switch an Unfolded Section View to a Full Section View
1. Open a drawing with an unfolded section view.
2. Double-click an unfolded section view. Alternatively, select an unfolded section view, right-click the view and click Properties. The Drawing View dialog box opens.
3. Under Categories, click Sections.
4. In the Sectioned Area list, select Full.
5. Click OK.
 |
• For a full unfolded section with full view visibility, the orientation of the view is based on the full section and not on the unfolded section.
• For a full unfolded section with half view visibility, if the view reference plane is not normal to the view, this reference plane is not used to define the half view.
|