Tip: Use Grid Settings to Control Jog Points
As you use Make Jog, you can set the Snap to grid and Snap to XY axes area checkboxes in the Tools > Environment dialog box to effect jog point placement:
• Snap to Grid checked and Snap to XY axes cleared—the jog point jumps to the nearest grid intersections.
• Snap to Grid checked and Snap to XY axes checked—if the final jog location is within a small offset of horizontal/vertical in relation to the destination point, it snaps to the horizontal/vertical position. If not, it snaps to the grid.
• Snap to Grid cleared and Snap to XY axes checked—When the jog moves, you can sketch only horizontal or vertical segments from the previous placement point. The final segment can be a diagonal line.
• If you click Snap to Grid cleared and Snap to XY axes cleared in the Environment menu, the jog point follows the cursor at any angle.