Engraving Toolpath Enhancements
Creo+
User Interface Location:
1. In Manufacturing, click > > 
Engraving.
Engraving.2. Select the Parameters tab.
Videos
Description
Previously, it was not possible to select individual curve segments from a single chain or multiple chains when creating an engraving NC sequence. It is now possible to select multiple curve segments or an individual curve segment from a single chain or multiple chains in the References collector and the Chain dialog box.
The new OPTIMIZE_LINKS parameter considers the shortest distance for connecting all curve segments in the specified order. The CUT_ENTRY_EXT and CUT_EXIT_EXT parameters with the ARC_TANGENT option is also now supported for the vertical entry and exit motions in engraving sequences.
These enhancements are supported for the 3, 4, and 5-axis engraving toolpaths.
Benefits
These enhancements provide the following benefits:
• Provide more flexibility and consistency
• Require fewer clicks to obtain the desired results
Additional Information
Tips: | None. |
Limitations: | You can select only individual curve segments at a time. Combination of individual curve segments and whole chains is not supported. |
Does this replace existing functionality? | No. |
Configuration option associated with this functionality: | None. |