• You can now probe result quantities that are available on the results legend as well as additional result quantities such as mass flow, volume flow, heat, natural frequency. You can now create probes before running the simulation study.

• You can select 12 mode shape values (earlier the maximum number of modes was 6). The first six mode shapes are the rigid body modes for an unconstrained model. You can probe the modal frequency for the selected mode.

• You can probe the average value of result quantities such as stress, strain, temperature, mass flow, etc. for a selected reference.

• Additional result quantities are available for static and total pressure​.

• Bodies are now selectable for results and probes, for all types of studies.

• You can select multiple references of the same type when creating a probe for a result quantity. For example, you can select multiple surfaces over which to probe the average value of stress.

• A dynamic query similar to that available in Creo Ansys Simulation allows you to query the value of a result quantity selected on the Results legend, at any point on the model.

• Many more result options are available to users.

• Users can dynamically query the value of a quantity at any point on the model.

• The pressure drop use case is now possible​ with the static and total pressure results available.