Support for Conformal Cooling Channels in Part Mode
Creo+
User Interface Location: In Part Mode, click one of the following:
• > > 
Conformal Cooling
Conformal Cooling• > 
Mold/Cast > 
Water Line > Conformal Cooling
Mold/Cast > Water Line > Conformal CoolingDescription
It is now possible to use the conformal cooling channels feature available under the Mold/Cast license in the Part Mode. This feature is also available under the Additive Manufacturing license.
Additionally, the 
Edit Dimensions command is enabled on the shortcut menu for the conformal cooling feature. You can use this command on the shortcut menu of the Model Tree.
Edit Dimensions command is enabled on the shortcut menu for the conformal cooling feature. You can use this command on the shortcut menu of the Model Tree.Benefits
These enhancements provide the following benefits:
• Enable the conformal cooling feature for the Additive Manufacturing extensions
• Provide the conformal cooling feature in the Part Mode
• Enable the Edit Dimensions command for the conformal cooling feature
Edit Dimensions command for the conformal cooling featureAdditional Information
Tips: | None. |
Limitations: | No known limitations. |
Does this replace existing functionality? | No. |
Configuration option associated with this functionality: | None. |