To Control the Display of Dimensions

Sketcher > Dimensioning Sketcher Geometry > To Control the Display of Dimensions

Perform one of the following operations:

• Set the sketcher_disp_dimensions and the sketcher_disp_weak_dimensions configuration options.

• Click or clear the Show dimensions and Show weak dimensions check boxes in the Sketcher area of the Creo+ Options dialog box.

• Click Setup > Show >

Dimensions Display. Or Setup > Show >

Weak Dimensions Display.

• Toggle the

Dimensions Display button in the

Sketcher Display Filters on the Graphics toolbar.

• Click View > Display >

Disp Dims.

Setting the Color of Dimensions

To change the default colors for strong dimensions, weak dimensions, and locked dimensions, follow the steps below:

1. Click File > Options. The Creo+ Options dialog box opens.

2. Click System Appearance.

3. Click the arrow next to Sketcher.

4. To redefine the color, click the color button to the left of a conductor type. A color palette appears.

5. Select a color from Theme Colors. The color button shows the selected color.

6. To revert to the default color, click Use Default .

7. Click OK.