About the Stock Boundary User Interface
The Stock Boundary user interface consists of the feature icon, feature tab, tabs, and shortcut menus.
Feature Icon
Stock Boundary is represented by 
.
.Feature Tab
The feature tab contains the following buttons for defining the stock boundary:
Envelope on WP—Creates a stock boundary from a workpiece.
Sketched envelope—Sketches the stock boundary.You can also use 
to sketch the stock boundary.
to sketch the stock boundary.Tabs
• Placement—Contains the following options that define the reference coordinate system and reference entities:
◦ Coordinate system—Specifies the reference coordinate system for the stock boundary.
◦ Workpiece—Specifies the workpiece for the stock boundary.
 | You can select only a single body workpiece model. |
• Properties—Enter a user-defined name for the feature. Stock Boundaries are generally created with a default name, such as STOCK_ENVELOPE_1, STOCK_ENVELOPE_2, and so on. You can change the default name by typing the new name in the Name field.
You can view information about the Stock Boundary feature in the Creo+ browser.
Shortcut Menus
When you select the stock boundary in the graphics window and right-click, a shortcut menu appears with the following option:
Clear—Removes the selected reference coordinate system. Alternatively, right-click the Placement Csys collector on the Placement panel and click Remove from the shortcut menu.