About Trimming Ejector Pin Heads
Use the Trim Ejector Pin Heads option if multiple ejector pins interfere after assembling the ejector pins.
Select > > 
Trim Ejector Pin Heads.
Trim Ejector Pin Heads.1. Select a Mode to trim the 
First Pin, 
Both Pins, or the 
Second Pin.
First Pin, Both Pins, or the Second Pin.2. Select a Gap size.
3. Select a pair of interfering ejector pins to assemble the trim UDFs and click OK in the Select dialog box.
4. Open the Pairs page to show trimmed pairs.
◦ Select 
Go To Pair to zoom-in on a selected pair in the list.
Go To Pair to zoom-in on a selected pair in the list.◦ Select 
Find in List to highlight the entry in the list of a selected pins in the graphics window.
Find in List to highlight the entry in the list of a selected pins in the graphics window.◦ Select 
Remove Pair to delete assembled written by trim UDFs from the selected pair in the list.
Remove Pair to delete assembled written by trim UDFs from the selected pair in the list.◦ Select the 
icon next to Ejector Pin 1 or Ejector Pin 2 to choose a different highlight color.
icon next to Ejector Pin 1 or Ejector Pin 2 to choose a different highlight color.5. Open the Interference page.
6. Select 
Show Pin Head Interferences to highlight all interfering pin models in the graphics window.
Show Pin Head Interferences to highlight all interfering pin models in the graphics window.7. Click 
to accept, or 
to remove all the newly created trim UDFs.
to accept, or to remove all the newly created trim UDFs.