To Use a Terminator Table
1. Click > . The Cabling Tool dialog box opens. Select 
from the 
drop down list. The Terminator Table dialog box opens.
from the drop down list. The Terminator Table dialog box opens.2. Type the required terminator name values in the first column as shown in the table below.
3. Use the remaining columns to set the criteria for the term_name assignment. Asterisks mean that the value applies to all values of the parameter in the column header. For example:
SET PIN TERM_NAME | MATCH CONN MODEL_NAME | MATCH SPOOL WIRE_GUAGE | MATCH COND MATERIAL |
mil_14324 | conn_A | 18 | * |
mil_14587 | conn_B | * | copper |
The terminator value mil_14324 is assigned to all pins that have a wire gauge of 18 from any material, using the conn_A part model. The mil_14587 value is assigned to all pins on connectors that use the conn_B part model that uses a copper conductor of any wire gauge.
4. To save the terminator table to a file, click > .
5. To update all the connector terminator parameters, click Apply. The term_name parameter with the appropriate value is attached to each pin that meets the set criteria.
6. To add or delete columns, click Insert or Edit.
7. After specifying the required parameter constraints in the terminator table, click OK.