|
SPR Number
|
Description
|
Link to Tech Support Article
|
Module
|
|---|---|---|---|
|
14526343
|
Drawing doesn't display GDT symbols correctly when viewing certain imported CGM file, while same file looks correct in the source program AND in Creo View but not in Creo Parametric
|
2D Interface - CGM
|
|
|
14464229
|
When import DWG file, colors displayed as numbers in the "DWG" column of the "Colors" tab of the "Mapping Properties" tab will not save "dxf_import.pro" after clicking "Save Mappings".
|
2D Interface - DWG
|
|
|
14583728
|
Missing geometry in DXF file generated by Creo Parametric
|
2D Interface - DXF
|
|
|
14021840
|
Model based annotations will become suppressed and disappear from the drawing depending on whether the Generic or the Flat Instance is active in Creo Parametric
|
2D-3D Detailing - AE DISPLAY
|
|
|
14668794
|
Symbol of Solid Weld feature in subassembly level cannot be shown in top/high assembly level
|
2D-3D Detailing - ALL_ANNOTATIONS
|
|
|
14680483
|
In specific conditions, the datum axis of a 3D component does not display in the correct position during preview "Show Annotations" dialog box in Creo Parametric.
|
2D-3D Detailing - ALL_ANNOTATIONS
|
|
|
14461770
|
Differences in Hatching Visualization between Creo Parametric 9.0 and Creo Parametric 8.0
|
2D-3D Detailing - Cross Section
|
|
|
14464005
|
Unable to edit the spacing/distance/scale of XCH hatching on existing drawings in Creo Parametric
|
2D-3D Detailing - Cross Section,Cross Sections
|
|
|
14656341
|
The dimension of a sketched Drilled Hole feature cannot be switched to expected oritantion / plane, but can once it is turned into any other Hole feature type than Drilled
|
2D-3D Detailing - Dimensions
|
|
|
14585851
|
Dual dimension shows incorrect decimal places ignoring the value set by detail option 'dual_digits_diff' once precision is changed from the Dual Dimension in the Dimension tab in Creo Parametric
|
2D-3D Detailing - Dimensions
|
|
|
14673247
|
The change of the specific dimension text's orientation is reset by editing the other dimension's gtol in Creo Parametric
|
2D-3D Detailing - Dimensions
|
|
|
14676677
|
Getting error "drawing program has an error" when trying to edit a drawing program in Creo Parametric
|
2D-3D Detailing - Drawing Program
|
|
|
14566211
|
Premature exit on trying to save a specific assembly
|
2D-3D Detailing - LAYER
|
|
|
14576831
|
Insert Overlay by Place Sheet and Save will result with large Datum Symbol Font after retrieval
|
2D-3D Detailing - OVERLAY
|
|
|
13757428
|
Plus and Minus symmetric tolerance Symbols are not shown correctly when symbol_font = stroked_iso is used in Creo Parametric
|
2D-3D Detailing - SYMBOLS
|
|
|
14530447
|
No out of the box way to set custom origin for symbol called out in a note using &SYM(symbol_name)No out of the box way to set custom origin for symbol called out in a note using &SYM(symbol_name)
|
2D-3D Detailing - SYMBOLS
|
|
|
14505778
|
Creo Parametric becomes unresponsive after detaching "Symbol Customization" panel when config option "drawing_setup_file" points to ".dtl" file stored in Windchill.
|
2D-3D Detailing - SYMBOLS
|
|
|
14609855
|
Plus and Minus symmetric tolerance Symbols are not shown correctly when symbol_font = stroked_asme is used in Creo Parametric
|
2D-3D Detailing - SYMBOLS
|
|
|
14611963
|
Using Import Drawing/Data, copied repeat regions are not populated with Creo Parametric
|
2D-3D Detailing - Table/Repeat Region/BOM
|
|
|
14397190
|
Unexpected exit of Creo Parametric occurs upon access to "Edit Hatchings" in Drawing environment in the scope of "hatch_pattern_convert_disp_gal hide"
|
2D-3D Detailing - Views
|
|
|
14563542
|
Difference in model tree after importing from PWS and that from local disk
|
3D Interface - Catia V5
|
|
|
14764015
|
It seems that for 2 bodies from same model, having same RGB but different transparencies, transparency for 1st body is getting applied to 2nd one
|
3D Interface - Catia V5
|
|
|
14721048
|
[HDIC] : Component that is de-activated in Catia is getting published in the Viz TIM Structure of Windchill
|
3D Interface - Catia V5
|
|
|
13804536
|
When converter model to PVZ in the Japanese version of Creo Parametric, "Standard Orientation" is not displayed correctly.
|
3D Interface - Creo View,Toolkit Graphics
|
|
|
14675317
|
Premature exit on selecting Import Data Doctor in Creo Parametric
|
3D Interface - Import Data Doctor
|
|
|
14733328
|
Appearances of models present inside assembly instances are not exported to JT format in Creo Parametric
|
3D Interface - JT
|
|
|
14652460
|
The "Shading with Edges" Display Style is not applied for edges resulting from "Lattice" feature
|
Additive Manufacturing - Lattice
|
|
|
14563430
|
When using the "rename project" option, it saves and creates other unrelated components as well from the working directory
|
Advanced Framework Extension
|
|
|
14649938
|
Component placement causes assembly's external reference getting outdated, if one component geometric interface's constraint is "Centered"
|
ASSEMBLY - Component Interfaces
|
|
|
14619283
|
A specific assembly being saved as backup, cannot be retrieved again since it stucks in the REGENERATION PROGRESS with the message "approximately ### total features remaining to regenerate" in Creo Parametric
|
ASSEMBLY - SAVE_AS
|
|
|
14570367
|
Copy (save as) of inseparable assembly keep a reference to the original
|
Assembly / PDM Integration
|
|
|
14583785
|
The config.pro option open_simplified_rep_by_default is set to NO wouldn't retrieve the file in the master representation in Creo Parametric.
|
Assembly Process - SIMP_REP,Config Options
|
|
|
14608986
|
Merge Harnesswith Move componentsoptiondoes not move component back into the active harness level
|
CABLE - ASSY
|
|
|
14762365
|
Missing documentation about the "Geometry Selection Tool" Panel for Creo Flow Analysis in Creo Parametric
|
CFD Analysis Application
|
|
|
14839603
|
In Composite mode if check off "Enable Preselection highlighting", don't have "Pick From List" command
|
Composite - Feature
|
|
|
14608623
|
Why the configuration "cpus_to_use" cannot be set to zero as default value like the option "generative_number_cores" in Creo Parametric
|
Config Options
|
|
|
14649824
|
"Show Embedded Panels" icon is missing in Ribbon command list in Creo Parametric 9.0
|
Creo Customization
|
|
|
14803009
|
Getting error "Creo Agent did not initialize correctly.Please contact Technical Support if the issue persists;" when working with older version after installation of Creo Parametric 10.0.1.0
|
Creo Installation
|
|
|
14656520
|
Dynamic fastener measures are not calculated during Dynamic Random Analysis in Creo Parametric
|
Creo Simulate - Engine
|
|
|
14794827
|
Use nodal averaging” check box does not have any effect of advanced results in Creo Ansys Simulation
|
Creo Simulation AIM - Post Processor
|
|
|
14537647
|
No warning message in Simulate Live after creating a frictionless constraint in Ansys and running the analysis in Creo Parametric 9.0.1.0
|
Creo Simulation Live - Probes
|
|
|
14569665
|
When using Distributed batch to run a ModelCheck task, although set environment variable MC_BATCH_REPORT_DIR to a different path, all the icon files are still outputted in the folder which store the checked objects in Creo Parametric
|
Distributed Batch
|
|
|
14446807
|
Bottom layer of Imported ECAD IPC-2581 files is incorrect after clicking on the Update ECAD Context Data Positions in Creo ParametricCreate an ECAD assembly and then create a Board. Import ECAD Context Data > Open the attached file 142-12317-1000-A01
|
ECAD-IMPORT
|
|
|
14471454
|
Unable to select geometry with the Measure tool upon importing ECAD Context Data of type ECAD IPC-2581 (.xml, .cvg) in Creo Parametric
|
ECAD-IMPORT
|
|
|
14528330
|
Premature exit on trying to import .emp file in Creo Parametric
|
ECAD-IMPORT
|
|
|
14590203
|
Importing an EMN file having New Components, the Investigate Geometry functionality won't check new objects in Creo Parametric
|
ECAD-IMPORT
|
|
|
14672357
|
Creo exits when selecting an annotation in graphic area and tryin to activate an combined view
|
Feature - Annotation Feature
|
|
|
13259950
|
Cosmetic Threads are not hilighted in Graphical Area when part is selected
|
Feature - Cosmetic
|
|
|
14538993
|
Ineffectiveness of csys_color_rgb Configuration when set to no Upon Reactivating Top Level Assembly in Creo Parametric 9.0.2.0
|
Feature - Datums
|
|
|
14597603
|
Extrude feature quilt (surface mode) which depth reference is a selected non-parallel surface or datum plane, does fail if the surface angled more than 3 degrees in Creo Parametric
|
Feature - Extrude
|
|
|
14646959
|
If delete all hole files(.hol) can't create simple hole and Creo Parametric crash
|
Feature - Hole
|
|
|
14521333
|
Creo Parametric exits when trying to offset a surface
|
Feature - Offset Surface
|
|
|
14745656
|
When redefine Trajectory Rib feature , traceback log comes up and premature exit happen in Creo Parametric
|
Feature - Rib
|
|
|
14618972
|
Draft and Round features of User-Defined Features (UDF) fails to regenerate while placing on target model
|
Feature - UDF
|
|
|
14600444
|
Unable to access Flexible Modeling environment with default filter set to Geometry in Creo Parametric
|
Flexible Modeling - Geometry
|
|
|
14627518
|
Creo Parametric unexpected exit when selecting the surface in GD&T-Advisor for a model with a surface created by copying the arc shape of a solid
|
GD&T Advisor - Misc
|
|
|
14631515
|
Config.pro option gdt_advisor_app_options_file does not work when using Windows or parametric.psf Environment Variable to configure the expected path location of an alternative options file "GDTAAppOptions.xml" in Creo Parametric
|
GD&T Advisor - Options
|
|
|
14590560
|
Setting "skip_small_surfaces Yes" in the "config.pro" file does not uncheck "Shade very small surfaces" in Creo Parametric
|
Graphics - Config
|
|
|
14647618
|
Config.pro option primary_monitor does not open Creo Parametric on the expected monitor.
|
Graphics - Config
|
|
|
14652832
|
Decimal places for some report harness user-defined parameters is not updating in the repeat region table in a specific drawing in Creo Parametric
|
Harness - REPORT
|
|
|
14520738
|
Unable to rename all models when using the J-link API Rename in Creo Parametric
|
J-Link
|
|
|
14496870
|
Message box "You have entered a value xxx that is out of range" cannot be closed with "OK" or "Cancel" when editing copied "Profile Turning >Tool Motions > Profile Turinig Cut"
|
Manufacturing-4XTURN
|
|
|
14797202
|
Parameter defined in file used for POST_MACHINING_FILE is not converted to its value in CL data in Creo Parametric
|
Manufacturing-CLDATA
|
|
|
14680540
|
Unable to retract the tool in the Z axis at the end of each tool pass in Conventional Milling sequence in Creo Parametric
|
Manufacturing-CUTLINE
|
|
|
14607089
|
Copy and paste of Nc sequence is not possible when the preview of the NC Tool path is activated in Creo Parametric
|
Manufacturing-FEATOPS
|
|
|
14673923
|
Incorrect pattern number in a saved copy of a manufacturing assembly after replacing reference and Workpace components in Creo Parametric
|
Manufacturing-FEATOPS
|
|
|
14676482
|
Mirror sequence do not support more than 2 HEAD
|
Manufacturing-FEATOPS
|
|
|
14528299
|
Missing steps with "Custom Drilling" with value defined as "Cycle References > Enter offset value from program zero in z direction”
|
Manufacturing-HOLE
|
|
|
14550439
|
Random Creo Exit with traceBack on a manufacturing model with a family table when saving or when verifying the family table.
|
Manufacturing-MISC
|
|
|
14647543
|
How to avoid the display of the confirmation window that appears during the re-calculation of the tool path computation by HSM milling sequence in Creo Parametric 9.0
|
Manufacturing-MISC
|
|
|
14528430
|
Moduleworks should treat the imported parameter VERICUT_TYPE with both source contents: ‘HOLDER’ or ’ACCESSORY’ as value ‘HOLDER’ in Creo Parameter
|
Manufacturing-ModuleWorks
|
|
|
14684564
|
Why is the silhouette of the finished part always visible when editing the Auto deburring sequence? This is not the case with other sequences
|
Manufacturing-ModuleWorks-High Speed Milling (HSM)
|
|
|
14680067
|
Creo Parametric exits when Starting ModuleWorks toolpath of a specific HSM Rough NC sequence with sepecifc parameter settings
|
Manufacturing-ModuleWorks-High Speed Milling (HSM)
|
|
|
14501346
|
The lengthening of curve sections in a trajectory processing is only created with one (the copied) curve section
|
Manufacturing-MTRAJ
|
|
|
14550665
|
Wrong tool path of trajectory milling pattern when the config.pro auto_Rückzug_Anpass Yes using the option subroutine absolute and MULTX in Creo Parametric
|
Manufacturing-MTRAJ
|
|
|
14471928
|
Creo Parametric exits when selecting the clearance retract reference surface in manufacturing assembly
|
Manufacturing-MTRAJ
|
|
|
14841855
|
After updating the inheritance in the finished part, trajectory milling displays a completely different reference in the definition of the tool motion curve cut in Creo Parametric
|
Manufacturing-MTRAJ
|
|
|
14679127
|
Premature exit on opening Manufacturing Assembly in Creo Parametric
|
Manufacturing-ST/RETR
|
|
|
14504590
|
When load tool model with "Flute Length > Tool Length" and change the "Offset Number" to "Apply", error is displayed in Creo Parametric 6.0 or later
|
Manufacturing-TOOL_MANAGER
|
|
|
14568525
|
"show model" under View menu in PLAY PATH dialog for pattern feature of sequence is not available
|
Manufacturing-TOOL_SETUP
|
|
|
14672216
|
Previous tool offset of MULTI-TIP tool is not cancelled after tool change in Creo Parametric
|
Manufacturing-TOOL_SETUP
|
|
|
14519143
|
Material named "Unassigned" cannot be set as Master Material in Creo Parametric
|
Model Properties - Materials
|
|
|
14256221
|
Unable to drag the line of "insert here" in model tree in Creo Parametric 9.0 when Dell Display Manager(version: 2.0.0.135) running while this issue won't happen in Creo 2.0
|
Model Tree
|
|
|
14538523
|
When add relation via modelehck , the relation get error constraint has been violated etc from part file in Creo Parametric
|
ModelCheck
|
|
|
14634771
|
Creo Parametric prematurely exits when clicking "Favorites" folder in the folder browser in Creo Parametric
|
Navigator Folder Browser
|
|
|
14604992
|
In a specific notebook and in the model for which it is declared to, certain parameters cannot be deleted from a large list, although no rejection message is displayed in Creo Parametric
|
Parameters UI
|
|
|
14597165
|
On re-adding the drawing from Commonspace to Workspace and overriding local modifications and confirming the update in session, does not update the drawing correctly in Creo Parametric
|
PDM Integration / Creo PDM Actions
|
|
|
14528056
|
The "Workspace" icon disappears if the workspace's name has a long length by multiple bytes.
|
PDM Integration / Folder Tree
|
|
|
14757051
|
TIM file shown as modified if windchill server and client machine have different time setting
|
PDM Integration / Heterogeneous Design in Context
|
|
|
14673983
|
Creo Parametric 10.0.0.0 crashes when accessing the Table tab in a drawing that has config.pro pro_table_dir pointing to a Windchill product/library (using the syntax wtpub://<server name>/Products/<name of product>
|
PDM Integration / Other
|
|
|
14646451
|
Some custom parameters in a symbol's variable text got replaced with Windchill related parameters, if the symbol come with an User Defined Feature (UDF) and if SAVE AND UPLOAD has been applied to the model in Creo Parametric
|
PDM Integration / Parameters-Attributes
|
|
|
13805059
|
Sometimes users cannot Check In Creo models with Server Error: Cannot retrieve family table neutral data
|
PDM Integration / Save to Workspace
|
|
|
14680084
|
Not possible to set Rotation angle of Fitting (Insert or Redefine Fitting) to a value with decimal places. Angle decimal value is automatically rounded in Creo Parametric
|
Piping - FIT
|
|
|
14610842
|
Editing newly created piping spec-driven auto-selection file in inches unit, removes all its content and replace with new one in Creo Parametric 7.0.11.0.
|
Piping - SPEC_DB
|
|
|
13917258
|
Image rotates in print preview and when printing
|
Print/Plot
|
|
|
14685491
|
When plotting the specific drawing, the hole edge is not plot out with quality 3(complex overwrap check)
|
Print/Plot
|
|
|
14628569
|
When exporting Fillet Weld Information, the xml file writes "length unit" and "mass unit" instead of "length_unit" and "mass_unit" (space character instead of underscore character)
|
Pro/Welding - INFO
|
|
|
14466943
|
Although the feature with the named "T" dimension has been deleted, it is still not possible to use T when creating curves from equations in Creo Parametric
|
Relations - Evaluate
|
|
|
14680571
|
In an imported STEP file, when Edit Bend feature Flexible Modeling is used to change the bend radius, hole in the geometry shifts in Creo Parametric
|
Sheetmetal - Flexible Modeling
|
|
|
14732230
|
message Section regeneration failed. Incompatible dimension values. when trying to modify a dimension is a specific interval value
|
Sketcher-Dimensions
|
|
|
14650001
|
Latency a little too long for the offset dimension to go into "edit" mode when moving or zooming with double click during sketch OFFSET command with Creo Parametric 9.0 and above
|
Sketcher-Use_Edge/Offset_Edge
|
|
|
14672670
|
After using the Delete Segment sketch tool to generate one loop from several Projected/Offset entities, overlapping vertices are marked as Open Ends instead of a closed loop in Creo Parametric
|
Sketcher-Use_Edge/Offset_Edge
|
|
|
14810301
|
A new column was added to Exit Logger that displaces other columns starting in Creo Parametric 10
|
System Monitor Exit Logger Integration
|
|
|
14634213
|
API ProImportfeatDataGet() returns import feature type as “PRO_INTF_NEUTRAL” instead of “PRO_INTF_JT” for a imported *.jt file in Creo Parametric through Toolkit
|
Toolkit 3D Interface
|
|
|
14575895
|
Customer request for new API to visit the Surface Finish symbols displayed in a drawing AND owned by that drawing (not by Solid)
|
Toolkit Annotations
|
|
|
14659283
|
The display status of specific drawing symbol instances is not correctly determined by Toolkit functions ProAnnotationIsShown() and ProAnnotationIsInactive() prior detail option update_drawing all being applied to the drawing in Creo Parametric
|
Toolkit Annotations
|
|
|
14513147
|
Inability to get the correct usable coordinates of FTS annotations like notes, symbols and GTols through Creo Parametric Toolkit API.
|
Toolkit Annotations
|
|
|
14445727
|
APIs ProAnnotationfeatElementArrayAdd() and ProAnnotationfeatElementArrayDelete() removes existing user defined parameters and references of annotation element while adding or removing annotation elements of annotation feature in Creo Parametric thro
|
Toolkit Annotations
|
|
|
14627425
|
API ProDrawingDtlsyminstsCollect() does not collect drawing owned datum targets in Creo Parametric through Toolkit
|
Toolkit Annotations
|
|
|
14000951
|
ProToolkit: Second call of ProModelitemNameSet() on a ProNote fails if the corresponding Model Properties>Name were previously edited
|
Toolkit Annotations
|
|
|
14601136
|
How to set the URL of the page to display but in a user defined dialog's embedded uifcBrowserWindow component in Creo Parametric Toolkit
|
Toolkit Custom UI Dialogs
|
|
|
14742283
|
The documentation for the ProGraphicsTextDisplay() API is incorrect when it says "All points are in logical screen coordinates."
|
Toolkit Graphics
|
|
|
14631718
|
ProSimprepMdlnameRetrieve returns PRO_TK_INVALID_NAME
|
Toolkit Retrieval
|
|
|
14622099
|
Is it possible to scroll to specific position if UI tree is longer than screen height
|
Toolkit UI
|
|
|
14599763
|
After inserting 100 images, attempting to insert the 101st image in a drawing does not produce a UI in Creo Parametric
|
Traced Sketch (Images)
|
|
|
14657234
|
Setting config.pro option "web_browser_in_separate_window" to "yes" confuses the users as the title of this separate browser window is identical to the active model
|
Web Browser
|
|
|
14805819
|
Creo Parametric attempts to start and flashes on screen but then exits before displaying the UI
|
X Non-reproducible
|