|
SPR Number
|
Description
|
Link to Tech Support Article
|
Module
|
|---|---|---|---|
|
14338101
|
Drawing export to autocad dwg: Each view in Wireframe display style: not supporting any blocks. But the expected blocks are exported per view, if it is in Hidden display style
|
2D Interface - DWG
|
|
|
14235656
|
The tolerance symbol of symmetric will offset the dimension when exporting drawing to DWG with option "Stroke special characters" set
|
2D Interface - DWG
|
|
|
14659058
|
In the PTC Help Center for Creo Parametric 9.0, the values for config option intf2d_out_acad_hatches is incorrect
|
2D Interface - DWG
|
|
|
14495421
|
Annotation Elements showing dimensions linked to Geometric Tolerances unexpectedly adds twice the Geometric Tolerances in Annotate Tree of Creo Parametric
|
2D-3D Detailing - 3D Gtols
|
|
|
14127070
|
Using UZ, the value following, user wants to use comma decimal delimiter as per their detail setup, but it's only taking the period decimal delimiter
|
2D-3D Detailing - 3D Gtols
|
|
|
14531640
|
Not possible to rename a custom symbol by adding a suffix in Creo Parametric
|
2D-3D Detailing - 3D Symbols
|
|
|
14504208
|
Mini Tool Bar commands disappear when editing the hatching spacing in Creo Parametric 9.0
|
2D-3D Detailing - Cross Section
|
|
|
14461969
|
Unable to delete/remove 2D section Hatch created by Hatch/Fill on a 3D model surface
|
2D-3D Detailing - Cross Section
|
|
|
14292671
|
Converting hatches to PAT format completely changes the display of the section. The hatches are shifted and the spacing changed in Creo Parametric
|
2D-3D Detailing - Cross Section
|
|
|
14473150
|
'Default hatch' label & tooltip of its options is confusing as it is applicable to only newly sectioned items.We should change 'Default hatch' label in the x-section dashboard to 'New objects hatch format:' and place the option menu below this label.
|
2D-3D Detailing - Cross Section
|
|
|
14235009
|
Adding multiple dimensions at once with Annotate > Dimensions shows different spacing than using Dimensions > Show Model Annotations
|
2D-3D Detailing - Dimensions
|
|
|
14404599
|
For 'BILATERAL' tolerance zone in Geometric Tolerance, the value for the default PTC parameter 'PTC_PROFBOUNDARY_TYPE' shows 'Biliteral' instead of 'BILATERAL' under Tools > Parameters in Creo Parametric
|
2D-3D Detailing - GTOLS
|
|
|
14549455
|
Unable to use an expression to set height property of a symbol in the Symbol Tab in Creo Paramertric
|
2D-3D Detailing - SYMBOLS
|
|
|
14498824
|
Surface Finish witness line extension on reference surface does not work on specific surfaces
|
2D-3D Detailing - SYMBOLS
|
|
|
14376779
|
"Undo/Redo" does not work for deleted notes in drawing table cells using "Delete" key on the keyboard
|
2D-3D Detailing - Table/Repeat Region/BOM
|
|
|
14387456
|
"Linear and Non-Linear Cross-Hatch Patterns" URL is proposed in the "XCH Pattern Convert" popup menu after access to Edit Hatching environment of a section view still containing XCH formats
|
2D-3D Detailing - Views
|
|
|
14363267
|
All the Explode lines are displayed in all combined states when exporting Creo Parametric assembly to JT
|
3D Interface - JT
|
|
|
14375059
|
Opening STEP file of 2 half spherical surfaces generates a third half spherical surface with Creo Parametric
|
3D Interface - STEP
|
|
|
13307079
|
In CCX result, Creepage and Clearance distance is not align with creo geometry measurement on circle surface with Creo Parametric
|
Analysis Display
|
|
|
13781264
|
Issue in CCX calculation in some use case --> Need to implement a Touchable part definition relative to floating part or Potential Free with Creo Parametric
|
Analysis UI
|
|
|
14462706
|
"Shrinkwrap Update" menu is not displayed for default envelope when "simprep_ondemand_settings" is set to "disable"
|
ASSEMBLY - ENVELOPE
|
|
|
14398716
|
"Create Part from Body" action from Model Tree unexpectedly succeeds when External Components permitted for reference creation is restricted
|
ASSEMBLY - GEOMCOPY
|
|
|
14576243
|
Creo Parametric exits when Assembling a workpiece with features inherited from a model by Select Manufacturing> Workpiece > Inherit Workpiece
|
ASSEMBLY - INHERITANCE FEAT
|
|
|
13869793
|
Conficts window reports more components need check-out operation, Drawing repeat region shows generic parameters value instead of instance parameter value.
|
ASSEMBLY - REGENERATION
|
|
|
14241826
|
Part level extrude cut feature that are refernced to another assembly component are not correctly regenerated in a specific assembly
|
ASSEMBLY - REGENERATION
|
|
|
14388883
|
Creo Parametric exits when attempting to open specific assembly (ASM)
|
ASSEMBLY - RETRIEVAL
|
|
|
14523440
|
'Use Template' function while generating new file names with adding a different set of values in the same window resets the names changed earlier using the first set of values while performing a 'Save-As' on an assembly in Creo Parametric
|
ASSEMBLY - SAVE_AS
|
|
|
13924722
|
Config.pro "mfg_comp_auto_upd_chk_off yes" does not switch off "Automatic Update" in "intersection" tab in UDF placement dialog
|
ASSEMBLY - UDF
|
|
|
14168974
|
Unable to import terminator (*.trm files) with name that include both “/” and “_ “ in Creo Parametric.
|
CABLE - TERM
|
|
|
14074043
|
Creo Parametric exits when set "min_animation_steps" in "config.sup" and click "Wizard" in Flow Analysis
|
CFD Analysis Application
|
|
|
14253266
|
When creating external flow analysis, all the boundary outlines are displayed instead of only the selected boundaries in Creo Parametric 9.0
|
CFD Analysis SimeriCSClosed
|
|
|
14578979
|
The following new config.pro setting browser_open_pdf_document is not documented in the Help Center of Creo Parametric 10.0.0.0
|
Config Options
|
|
|
14514710
|
Wrong result with system created setting "DEFAULT" in capital letters for smt_bend_notes options
|
Config Options
|
|
|
14578955
|
The documentation of the config.pro setting retrieve_relations_ref_model(s) is unclear in Creo Parametric 10.0.0.0
|
Config Options
|
|
|
14255743
|
The conditions for certification when using Creo Render Studio in GPU mode are unclear.
|
Creo Hardware Check Utility
|
|
|
13995377
|
Some board conductors from an .eda file are not imported correctly in Creo parametric. They are imported correctly in Creo view but not in Creo parametric
|
ECAD-CONDUCTORS
|
|
|
14530384
|
Measure values do not update after changing the units for imported *.EMN files in Creo Parametric
|
ECAD-IMPORT
|
|
|
14395381
|
The instances will be colored in yellow when save family table in excel and they would be cleared totally in Creo if the instance name includes some Chinese character
|
Family Table - Misc
|
|
|
14110538
|
Flexible components assembled as dimension pattern does not update placement when changing the pattern component placement in Creo Parametric
|
Feature - Pattern
|
|
|
14531597
|
Some Pattern members of an Extrude feature after the creation of a Round feature based on an intent edge
|
Feature - Pattern
|
|
|
14410796
|
The plus ‘+’ sign for adding new Combined State is greyed out while user is working in any Tab other than Annotate
|
Graphics - UI
|
|
|
14408367
|
Opening a help page from Creo with F1 key takes too much time when using PRO_LANG=Czech as variable or in .*psf file
|
Help System (Viewer, NOT CONTENT)
|
|
|
14250943
|
Wrong shape with "Area Turning" and confi..pro "mfg_turn_rgh_prof_overtravel yes"
|
Manufacturing-AREA
|
|
|
14418775
|
Wrong "Circle" and wrong "GOTO" commands using config.pro "mfg_skew_circ_goto_convert_fix principal_axis yes" for Volume Milling
|
Manufacturing-CLDATA
|
|
|
14524526
|
Material Removal feature for trajectory milling does not fit the side milling cutter tool diameter applied
|
Manufacturing-MTRAJ
|
|
|
14315961
|
The parameter value of DELAY gets automatically populated for legacy deep drilling sequence in Creo Parametric
|
Manufacturing-PARAM_TREE
|
|
|
14109750
|
Modifying NC Sequence parameters through model tree is slower and continues to slow further down as manufacturing file grows in in Creo Parametric 8.0
|
Manufacturing-PERFORMANCE
|
|
|
14511628
|
Typo in Absolute Accuracy invalid message in Creo Parametric
|
Model Properties - Accuracy
|
|
|
14345263
|
When a layer tree tab is shown next to a mdoel tree tab, model tree tab is switched to the layer tree tab automatically by activating a certain simprep
|
Model Tree
|
|
|
14503601
|
Floating Model Tree does lost the ability to maximize and lock to half screen starting in Creo Parametric 8.0
|
Model Tree
|
|
|
14603615
|
When regeneration of a feature of a part is failed, the part and the feature are not colored by RED in the model tree
|
Model Tree
|
|
|
14464196
|
Creo Parametric fails to update the model accuracy with message message "Model Accuracy Could not be updated"
|
ModelCheck
|
|
|
14408615
|
ModelCHECK STD_DTL_SETUP doesn't show error for missing line_style_length detail option when compared to standard detail file in Creo Parametric
|
ModelCheck
|
|
|
14500130
|
Creating a custom filter in the parameter list using Column: Name and Value: *_KEY to filter parameters cannot be used in Creo Parametric
|
Parameters UI
|
|
|
14134084
|
Regression in Creo Parameric 9.0 in implementing server registraion via .srv_mgr_db3.fldx, Creo exits At Startup
|
PDM Integration / Server Management
|
|
|
13851865
|
Printing a 3D model in non shading display modes like no hidden or wireframe display with all combined states does not print all annotations. Some of the annotation are truncated
|
Print/Plot
|
|
|
14514463
|
Solid Weld can be hidden in subassembly level window and cannot be hidden from top assembly level
|
Pro/Welding - DISPLAY
|
|
|
14471951
|
Sheetmetal cut behaves unexpected in some cases with Creo Parametric
|
Sheetmetal - CUT_GEOM
|
|
|
14497499
|
Unexpected exit occurs when selecting Flat Pattern Preview button on an embedded sheetmetal part called from an inseparable assembly
|
Sheetmetal - FLAT_PAT
|
|
|
14511414
|
In the case of bent sheet metal part, axes resulting from mirroring part do not follow "unbend"
|
Sheetmetal - UNBEND
|
|
|
14419855
|
Extra lines appear in the flat view of drawing of legacy sheetmetal part near the relief from the Unbend feature in Creo Parametric
|
Sheetmetal - UNBEND
|
|
|
14404641
|
Creo reports error WARNING: External ref. for feature/component not found, using old placement when edit definition features after shrinkwrap reference model changed, also comes with serious performance problem.
|
Shrinkwrap Feature
|
|
|
14304852
|
ProIntfimportModelWithOptionsMdlnameCreate does not consider all the settings from the default STEP profile set through config option import_profiles_step in Creo Parametric 7.0
|
Toolkit 3D Interface
|
|
|
14514556
|
API ProAnnotationelemArrayReferencesSet() which is not equipped with an example in current user guide, fails on customer example code with curve/edge reference
|
Toolkit Annotations
|
|
|
14573401
|
ProWStringArrayFree API returns PRO_TK_BAD_INPUTS
|
Toolkit Annotations
|
|
|
14471479
|
The APIs ProModelitemNameGet and ProModelitemNameSet can be used to get and set name of ProCombstate model item type
|
Toolkit APIWizard
|
|
|
14163417
|
Unable to route cables through if the cabling assembly is contained within a top-level assembly as API ProCableThruLocationRoute() returns "PRO_TK_E_GENERAL_ERROR" in Creo Parametric through Toolkit
|
Toolkit Cabling
|
|
|
14488586
|
API ProCableThruLocationRoute() returns error "PRO_TK_GENERAL_ERROR" while trying to route cable through CSYS and AXIS location references in Creo Parametric through Toolkit
|
Toolkit Cabling
|
|
|
14503434
|
API ProCableThruLocationRoute() fails with error “PRO_TK_GENERAL_ERROR” to route cable through Csys > Points > Axes > Csys and application crashes when API ProCableThruLocationRoute() is called again in same session of Creo Parametric through Toolkit
|
Toolkit Cabling
|
|
|
14399006
|
Although configured, the right button menu is no longer displayed in a custom dashboard UI element
|
Toolkit Custom UI Dialogs
|
|
|
14316648
|
Unable to set 3D note elbow length using ProNoteElbowlengthSet().
|
Toolkit Drawings
|
|
|
14659374
|
According to SPR 14110959 any new classes must be named according to a new naming condition regarding length, which has been introduced in Toolkit but is still not yet documented
|
Toolkit External Data
|
|
|
14466506
|
API ProFamtableItemVisit() keeps visiting parameter column of family table even if the respective parameter is deleted from model in Creo Parametric through Toolkit
|
Toolkit Family Tables
|
|
|
14466536
|
API ProFeatureElemtreeExtract() extracts value for element "PRO_E_CURVE_TYPE" as "-1" instead of "43" (PRO_CURVE_TYPE_FOREIGN) for foreign type curve (PRO_CURVE_TYPE_FOREIGN) in Creo Parametric through Toolkit
|
Toolkit Feature Element Trees
|
|
|
14325656
|
Calling API ProFeatureElemtreeExtract() on mirrored merge feature with missing reference model causes application to crash when config.pro option "retrieve_merge_ref_parts" is set to "ignore_missing" in Creo Parametric through Toolkit
|
Toolkit Features / Basic Access
|
|
|
14325609
|
API ProFeatureElemtreeExtract() prompts "File > Open" UI dialog with a message "Merge Reference part lost. Select the same part from a different location" when called on mirrored merge feature in family table instance models in Creo Parametric
|
Toolkit Features / Basic Access
|
|
|
14463859
|
Premature exit occurs on calling API ProForeignCurveClassEvalSet() with eval_func set to NULL value in order to unbind curve class from previously bound evaluation function in Creo Parametric through Toolkit
|
Toolkit Geometry
|
|
|
14170148
|
Creo View doesn't show GDT symbols correctly when viewing native Creo Parametric drawing created with "symbol_font" set to "stroked_iso" or "stroked_asme"
|
Toolkit GraphiCSClosed
|
|
|
14500790
|
ProToolkit API ProSelbufferChangePostAction that can be set via ProNotificationSet and type PRO_SELBUFFER_CHANGE_POST does not work in drawing mode while working for solid models quite well
|
Toolkit Notifications
|
|
|
14308408
|
ProRelsetRegenerate() returns PRO_TK_NO_ERROR even though there is an error present in Model relations in Creo Parametric
|
Toolkit Relations
|
|
|
14239201
|
Unable to align the table cell content to center in the table created in Creo UI editor
|
Toolkit UI
|
|
|
14365611
|
Chart Object does not support Mathcad UniMath font in Mathcad Prime
|
Top Level UI
|
|
|
14363089
|
Creo exit prematurely when clicking a mailto hyperlink in embedded browser
|
Web Browser
|
|
|
14592754
|
Resource center window and home page window popup when starting Creo Parametric in no graphic mode
|
Web Browser
|