Configuration Options for Diagram
关于配置选项
可通过更改配置文件的配置选项来预设环境选项和其他全局设置。
要设置配置选项，请单击 > 
“选项”(Options) 打开对话框，然后单击“配置编辑器”(Configuration Editor)。
“选项”(Options) 打开对话框，然后单击“配置编辑器”(Configuration Editor)。此模块的配置选项按字母顺序列出。每一选项包含如下信息：
• 配置选项名称。
• 默认和可用的变量或值。默认值后带有星号 (*)。
• 简单说明。
在开始工作前设置所需选项。有关使用配置编辑器更改、添加或搜索配置选项的详细信息，请参阅相关主题“设置配置选项”。
diagram_export_allow
Allows saving a copy of an open diagram as a DGE file for using in Creo Schematics.
yes*, no
yes—Allows saving a copy of a diagram as a DGE file.
no—Does not allow saving a diagram as a DGE file.
diagram_pin_edit_multi_line
no*, yes
yes—You can add user defined pin parameters by including them between the DEFINE and ENDDEF statements for each pin.
no—The system uses a columnar format. Determines the Pro/TABLE format used when you are modifying pin parameters.
pro_spool_dir
<home directory>
Sets the default directory from which the spools are retrieved by default. Use the full path name, for example: /home/users/spools
The current working directory is the default directory.
general_undo_stack_limit
50
Sets the number of undo or redo operations. If the number of operations exceeds 50, the first operation in the stack is removed first, and so on.
orthogonal_snap
yes*, no
Controls non-90 degree routing in Diagram.
yes—Turns the Ortho Snap function on; allowing you to sketch wires only at the default horizontal and vertical orientations.
no—Allows you to sketch wires in drawings at angles other than the default horizontal and vertical orientations.
terminator_table_out_unicode
yes*, no
yes—Unicode strings are exported to terminator table files.
no—Unicode strings are converted to ASCII characters when exported to terminator table files. You must have ASCII characters to load terminator table files into Creo Schematics.
Parent topic