|
Do not define any additional profile classes.
|
|
RESTRICT type profiles do not return an error message if you place parts on them. The restriction is merely an "off limits" indicator for facilitating your design work.
|
BODY-OUTLINE
|
The profile is placed on a permanent workplane. It is extruded by the HEIGHT value in the current PROFILE section to create the part body. The profile on the workplane must be valid for an extrude command and may contain only one outer profile.
|
BOARD-CUTOUT
|
The 2D geometry of the profile is placed on a permanent workplane and used to punch the board. The profile on a BOARD-CUTOUT workplane must be valid for a punch operation.
|
RESTRICT-AREA
|
The 2D geometry of the profile is placed on a permanent workplane. The profile on a RESTRICT-AREA workplane may contain several closed polygons.
|
RESTRICT-BODY
|
The 2D geometry of the profile is placed on a permanent workplane representing a height restrict area on the appropriate side of the board. The restrict height is taken from the HEIGHT value in the current PROFILE section.
|
RESTRICT-BODY-TOP
|
Provided for compatibility: The 2D geometry of the profile is placed on a permanent workplane representing a height restrict area on the top side of the board. The restrict height is taken from the HEIGHT value in the current PROFILE section.
|
RESTRICT-BODY-BOT
|
Provided for compatibility: The 2D geometry of the profile is placed on a permanent workplane representing a height restrict area on the bottom side of the board. The restrict height is taken from the HEIGHT value in the current PROFILE section.
|
ANNOTATION
|
The profile is placed on a permanent workplane. Arc paths, circles and geometry_construction_point are exchanged.
|
OTHER-OUTLINE
|
Used for outline types other than those specified above.
|
BOARD
|
The profile may be used with components of type BOARD only.
|
PACKAGE
|
The profile may be used with components of type PACKAGE only.
|
ALL
|
The profile may be used with components of type BOARD and PACKAGE.
|
TOP
|
The profile applies to the top layer of the board only.
|
BOTTOM
|
The profile applies to the bottom layer of the board only.
|
BOTH
|
The profile applies to both the top and the bottom layers of the board.
|
INNER
|
The profile applies to inner layers of the board only.
|
ALL
|
The profile applies to all layers of the board.
|
.BOARD_OUTLINE
|
For defining the outline, cutouts, and thickness of the board.
|
.OTHER_OUTLINE
|
For defining the outline, cutouts, and thickness of any outline other than the board outline.
|
.ROUTE_OUTLINE
|
For defining an area in which to route electrical connections.
|
.PLACE_OUTLINE
|
For defining an area in which to place components.
|
.ROUTE_KEEPOUT
|
For defining an area in which routing is not allowed.
|
.VIA_KEEPOUT
|
For defining an area in which vias are not allowed.
|
.PLACE_KEEPOUT
|
For defining an area in which electrical components are not allowed.
|
.DRILLED_HOLES
|
For defining drilled holes in the board.
|
.NOTES
|
For defining annotations to communicate additional information among designers.
|
.PLACEMENT
|
For defining the locations of components on the board. The placement information in the IDF board file includes the location of the part origin, the part orientation, and the side of the board on which the part is placed.
|
MCAD
|
The outline is owned by ME CAD system (i.e. Creo Elements/Direct Modeling) and should not be modified in the EE CAD system.
|
ECAD
|
The outline is owned by the EE CAD system and should not be modified in the ME CAD system.
|
UNOWNED
|
The outline can be modified in either system.
|