Creo Elements/Direct Cabling Tutorial 1: Step 1 of 4
Start the module and load the PKG file
Creo Elements/Direct Cabling is a licensed module. You must have a license to use this module, and you must activate it to make its functionality available.
To activate Creo Elements/Direct Cabling,
1. Click > . The Modules dialog box opens.
2. Click Cabling under Applications.
3. Click Close.
4. Load CablingTutorial1.pkg.
The Creo Elements/Direct Modeling task menu changes to the Creo Elements/Direct Cabling menu. Switch menus by clicking Applications, then the name of the application. You can also click on the arrows at the bottom right corner of the Creo Elements/Direct Modeling window to scroll through current applications. For this tutorial, you do not need to switch between applications.
Create a harness assembly
Creo Elements/Direct Cabling creates parts in a harness assembly. Assemblies store all part and cabling information.
If you do not have a harness assembly and you try to open any menu except the Harness menu, you see a message as follows:
Cannot find active harness assembly.
Click OK and create one via the menu:
To create a harness assembly,
1. Click Cabling and then, in the Harness group, click 
New. The Create Harness dialog box opens.
New. The Create Harness dialog box opens.2. Type Harness_1 in the Name box.
3. Click OK 
to complete the operation.
to complete the operation.The new harness assembly displays in the Structure Browser. If you create a harness in the dialog, Creo Elements/Direct Cabling gives the harness a default name such as Harness_1. You can change its name in the Structure Browser just like a part or assembly.