Extended modules > Creo Elements/Direct Cabling > Manual Routing > Route cables manually using pin tables
  
Route cables manually using pin tables
You can create cables between two or more connectors using pin tables.
1. Click Cabling and then, in the Manual Routing group, click Pin tables. The Connect Wires dialog box opens.
2. Click Wire and select a wire from the table.
3. Click Connector and select two or more connectors. As soon as you select a connector, its pin table appears.
4. Select the pins in the pin tables to create the cables between connectors.
* 
You can delete wires by clicking Delete and selecting a connector. All wires connected to it are deleted.
5. Click to complete the operation.